This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ28Z610-R1:如何设置欠压永久失效

Guru**** 2540720 points


请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1385246/bq28z610-r1-how-to-set-permanent-fail-for-undervoltage

器件型号:BQ28Z610-R1

工具与软件:

您好!

28z610-R1是否具有欠压永久失效特性?  我知道当遇到服务器电池欠压情况时、非 R1无法阻止进一步充电。

如果只有非永久性 UVLO 保护可用、那么是否通过数据表中指定的固定 Vshutdown 电压提供?

谢谢!

SAL

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Sal、

    R1版本也不支持欠压永久失效。 如 TRM 中所述、您必须通过 Vshutdown 使用电芯欠压保护。

    此致、

    Siddharth