This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] USB-TO-GPIO2:Fusion Digital Power Designer GUI 是否支持"USB-TO-GPIO2"适配器。

Guru**** 1827200 points
Other Parts Discussed in Thread: TPS53659, TPS53622, USB-TO-GPIO2
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1395621/usb-to-gpio2-does-fusion-digital-power-designer-gui-supports-the-usb-to-gpio2-adaptor

器件型号:USB-TO-GPIO2
Thread 中讨论的其他器件:TPS53659TPS53622

工具与软件:

您好!

我们 在定制电路板上使用了多相 VR (P/N:TPS53659和 TPS53622)。

现在、要对 VR 进行编程/配置、我们需要 USB 接口适配器。  

我想知道-

1.哪是 TPS53659和 TPS53622的最新版本 Fusion Digital Power Designer GUI)?

2.此最新版本的 GUI (Fusion Digital Power Designer)是否支持 USB-TO-GPIO2 USB 接口适配器。  

3.如果所需或 USB 接口与最新接口不同,请告知我们。 在中应购买(SB 至 GPIO2或 SB-TO-GPIO)。  

谢谢你

Raj Kumar