This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] BQ24725A:当充电器切换到充电模式时、I2C 冻结

Guru**** 2390735 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1456547/bq24725a-i2c-freezes-when-charger-switches-to-charging-mode

器件型号:BQ24725A

工具与软件:

尊敬的专家:

我的设计使用 STM32F103C8T6接口与充电器 IC (使用 SMBus)、通过 I2C。 当充电器切换到充电模式时、MCU 经常冻结。

我不了解根本原因、请帮助我解释并解决此问题。

随附的文件是充电器原理图、在 MCU 侧上拉。

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    你好、Hieu、

    您能解释一下冻结是什么意思吗? 这可能与 MCU 相关、您是否已联系为此 MCU 提供支持的团队?

    此致、

    Christian。