• 状态 Resolved
  • 已锁定 已锁定
  • 回复 6 回复
  • 订户 0 订户
  • 视图 124 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SK-AM62P-LP：Yocto 构建 U-Boot Falcon 模式失败

admin
Guru**** 2560390 points


请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1544983/sk-am62p-lp-yocto-build-u-boot-falcon-mode-failed

器件型号：SK-AM62P-LP


工具/软件：

您好 TI  

我构建  U-Boot 猎鹰模式  使用 Yocto 作为  https://software-dl.ti.com/processor-sdk-linux/esd/AM62PX/11_01_05_03/exports/docs/linux/Foundational_Components /U-Boot/UG-Falcon-Mode.html

我  

echo 'ISTROOVERERRIDES：append =“：ti-falcon“>>conf/local.conf 

编译,编译正常,但安装有一些错误 

您可以检查安装日志 

e2e.ti.com/.../8838.log_5F00_do_5F00_install.txt