[参考译文] Linux/TMDSEVM572X：Arago &quot；base-rootfs&quot；仅初始化2个以太网接口

admin

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/829346/linux-tmdsevm572x-arago-base-rootfs-initializes-only-2-ethernet-interfaces

Kemal R. Shakir、您好。

更多问题：

我已经为 am572x IDK 构建了 SDK：

MACHINE=am57xx-EVM bitbake core-image-base

生成的 rootfs ("base-rootfs"，为60MB)工作正常，但它仅初始化2个以太网接口。

"default"rootfs ("default-rootfs"为5900MB) 初始化4 个以太网接口。

我已经比较了"base-rootfs"和 "default-rootfs"上的 am572x-idk-common.dtsi、它们是相同的。

如何在 "base-rootfs"初始化4个以太网接口？

5 年多前

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

是否可以从 "base-rootfs"和"default-rootfs"发布 ifconfig 命令的输出？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

deafult rootfs 中的 ifconfig：

root@am57xx-EVM：~# ifconfig
eth0 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2A
inet6 addr：fe80：：a2f6：fdff：feb2：8e2a%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：35错误：0丢弃：0超限：0帧：0
TX 数据包：33错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：3164 (3.0 KiB) TX 字节：6190 (6.0 KiB)
中断：85

eth1 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2B
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

eth2 链接地址：以太网 HWaddr 70：FF：76：1C：08：91
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

eth3 链接地址：以太网 HWaddr 70：FF：76：1C：08：92
inet6 addr：fe80：：72ff：76ff：fe1c：892%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：32错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：6120 (5.9 KiB)

低 链路环状图:本地环回
iNet addr：127.0.0.1掩码：255.0.0.0
inet6 addr:::1%763612/128范围:主机
正在运行 MTU：65536公制：1的上环回
RX 数据包：168错误：0丢弃：0超限：0帧：0
TX 数据包：168错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：12924 (12.6KiB) TX 字节：12924 (12.6KiB)

root@am57xx-EVM：~

基本 rootfs 上的 ifconfig：

root@am57xx-EVM：~# ifconfig
eth0 链路连接：以太网 HWaddr D4：36：39：27：55：CC
inet6 addr：fe80：d636：39ff：fe27：55cc%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：32错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：6015 (5.8 KiB)
中断：86

eth1 链路连接：以太网 HWaddr D4：36：39：27：55：CD
inet6 addr：fe80：d636：39ff：fe27：55cd%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：33错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：6105 (5.9 KiB)

lo 链路环状图:本地环回
iNet addr：127.0.0.1掩码：255.0.0.0
inet6 addr:::1%763612/128范围:主机
正在运行 MTU：65536公制：1的上环回
RX 数据包：168错误：0丢弃：0超限：0帧：0
TX 数据包：168错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：12924 (12.6KiB) TX 字节：12924 (12.6KiB)

root@am57xx-EVM：~

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您需要安装 kernel-module-ti-prueth-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.tisdk1.3_am57xx_evm.ipk、prueth-fw_5.1+d315a9bb00-r7a+r7a67+dspa+d7dap1.3-r67_rtspra67+rga1.3-rga67+d7a1.3-rga67+rga1.3-rga1.3-rga67+dap1.3-rgapra1.3-r4rga37da1.3-rgapra1.3-rgaprdap-da1.3-rga37da1.3-rga1.3-r4rga1.3-rga1.3-rga1.3bdapra1.3-rga1.3b0+dpra1.da67+daprapra1.3-rgapra1.da1.da1.dapra1.bd kernel-module-pruss-sc-bus-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk、kernel-module-remoteproc-4.14.67-gd315a9b00_4.57da5+gtisd7a3b0+ga1.3bga+ga17diptisdspm.ap1.3b0+rga1.3bdaga1.3bdaga+rga0_a1.3bdaga1.3bdaga+rg

opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-ti-prueth-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends prueth-fw_5.1.4-r0_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-pru-rproc-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-pruss-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-pruss-intc-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-pruss-soc-bus-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk
opkg --add-arch am57xx_evm:66 install --force-depends kernel-module-remoteproc-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisdk1.3_am57xx_evm.ipk

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

在 base-rootfs 中精细安装的软件包：

root@am57xx-EVM：~ ls
kernel-module-prU-rproc-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.tisd1.3_am57xx_evm.ipk kernel-module-pruss-14.4.14.67+gitd7b67+gdspa1.3-rga1.3-gtisd7p7bga+ga1.3-rga1.3-rga37dsp467+ga1.3-rga1.3-gdspa37dspa1.3-rga1.3-ga1.3-rgdspa4rga37da1.3-rgda1.3-rgdspa37dspa1.3-ga1.3-gdspa4rgda1.da37dspa1.dspa4rga1.bda4rga4rga4rga1.bdspa4rgdspa4dspa37dspa1.da1.bdspa1.







~@



root@am57xx-EVM：~ü r# opkg --add-arch am57xx_EVM：66安装--force-deposups kernel-module-pruss-4.14.67-gd315a9bb00_4.14.67+git0+dbba9a9a315-r7a.tisdk1.3_am57xx_evm-rdpra315-14.67+gdpra3150+gd370-gda-rgdpra315-414.67+gdpra370-rgds-root-rgdpra3150+gdpra2mues+gd370-r4r4rgda-rgda315-9a315-gda-



root@am57xx-EVM：~ü r# opkg --add-arch am57xx_EVM：66安装--force-deposups kernel-module-pruss-intc-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.dk1.3-gtisd7bd7+ina-rgituss

在内核上安装4.14.67-d315-gd7bd7bd467+gituss (在4.dtisd4+gd7bdspa+gd4r-r-r-r-d7b67+ga+gdspa+gdsps)

root@am57xx-EVM：~ü r# opkg --add-arch am57xx_EVM：66安装--force-depuser-sus-bus-4.14.67-gd315a9bb00_4.14.67+git0+d315a9bb00-r7a.arago5.dkspo-4.14.67-gd315a9bb00+gituss

内核(在 d375+dspo+ga-dspia-ga-dspia-d379b-dspia-dspia-dspia-dspia-dspia-d37+gdspia-dspia-dspia-dspia-d414.6+dsps 内核上配置)

root@am57xx-EVM：~



@~

@~ opkg --add-arch am57xx_EVM：66安装--force-department kernel-module-remoteproc-4.14.67-gd315a9bb00_4.14.67+git0+dtisa9bb00-r7a.arago5.rgdk1.3_rga376b67+rga+rga+rga137-rga+rga+ga37d_remote_remote_remote_remote_load-rga1.3-rga1.3-rga1.3-r1da1.37ga+ga+ga+ga+ga+ga1.3-rga+ga1.37da+ga+ga+ga1.7xx-rga1.3-rga+ga1.3-rga1.3-rga1.3-rga1.37da+ga+ga+gr：rga1.3bdagram-rgr a kernel-remotrga1.3bdag



root@am57xx-EVM：~# opkg --add-arch am57xx_EVM：66安装--force-depends prueth-FW_5.1.4-r0_am57xx_evm.ipk
在 root
上安装 prueth-FW (5.1.4)配置 prueth-FW。

出现了3个和4个以太网接口。

但是、测试发现 ip 命令(链接到 prp)有问题：

root@am57xx-EVM：~ ifconfig
eth0 Link encap:以太网 HWaddr A0：F6：FD：B2：8E：2A
UP 广播组播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超支：0帧：0
TX 数据包：0错误：0丢弃：0冲突：0载波：0超支
：0 TXelen：
0.0字节(RX：B)
中断：85

eth1 Link encap:以太网 HWaddr A0：F6：FD：B2：8E：2B
向上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0帧：0
TX 数据包：0错误：0丢弃：0溢出：0载波：0
冲突：0 txqueuelen：1000
RX 字节：0 (B) TX 字节：0 (0.0)

ETH2链路加密：以太网 HWaddr 70：FF：76：1C：08：91
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0超
支：0帧：0 TX 数据包：0错误：0中断：0
冲突：0载波：0 txelen：1000
RX 字节：0 (0.0 B) TX 字节：0帧：0 TX

字节：0、0 TX 字节：0冲突：0：0 (HWADDR：0：76：00：00：00：00)以太网队列地址：76：76：00
FE80：72ff：76ff：fe1c：892%763612/64范围：链路
上行广播运行多播 MTU：1500公制：1
RX 数据包：135错误：0丢弃：0溢出：0 TX
数据包：38错误：0丢弃：0溢出：0载波：0
冲突：0 txqueuelen：1000
RX 字节：27192 (


127.0.0.0)回路掩码：20.0.0字节(127.0.0.0)回
路掩码：0.56字节 ：1%763612/128范围：运行
MTU：65536公制：1
RX 数据包：163错误：0丢弃：0溢出：0帧：0
TX 数据包：163错误：0丢弃：0溢出：0载波：0
冲突：0 queuelen：1000
RX 字节：12472 (12.1 KiB) TX 字节：12472 (12.1 KiB)错误：163个错误：0个中断：0个载波：0个溢出：0个冲突0个冲突0个；

@
1000个冲突0个 CPU：1000个 RX 字节：1000个 RX 字节：1000个 RX：1000个 RX 字节：1000个 RX 字节：1000个~ RX 字节：1000个 RX) TX 字节1个 TX 字节1个 IP 地址：1个 IP 地址
~@

在 default-rootfs 中，ip 命令的作用是：

root@am57xx-EVM：~# ip link add name prp0 type prp slave1 eth2 slave2 eth3 supervision 45
root@am57xx-EVM：~# ifconfig prp0 192.168.14.126 up
root@am57xx-EVM：~# ifconfig
eth0 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2A
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)
中断：85

eth1 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2B
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

eth2 链接地址：以太网 HWaddr 70：FF：76：1C：08：91
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

eth3 链接地址：以太网 HWaddr 70：FF：76：1C：08：92
inet6 addr：fe80：：72ff：76ff：fe1c：892%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：97错误：0丢弃：0超限：0帧：0
TX 数据包：70错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：19206 (18.7 KiB) TX 字节：12280 (11.9 KiB)

lo 链路环状图:本地环回
iNet addr：127.0.0.1掩码：255.0.0.0
inet6 addr:::1%763612/128范围:主机
正在运行 MTU：65536公制：1的上环回
RX 数据包：171错误：0丢弃：0超限：0帧：0
TX 数据包：171错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：13140 (12.8 KiB) TX 字节：13140 (12.8 KiB)

prp0 链接地址：以太网 HWaddr 70：FF：76：1C：08：91
iNet addr：192.168.14.126 Bcast：192.168.14.255掩码：255.255.255.0
inet6 addr：fe80：：72ff：76ff：fe1c：891%763612/64范围：链接
运行多播 MTU：1494公制：1的上广播
RX 数据包：0错误：0丢弃：16超限：0帧：0
TX 数据包：34错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：5747 (5.6 KiB)

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您好、VLeshka、

请安装 libelF1和 iproute2软件包以解决此问题。

$ MACHINE=am57xx-EVM bitbake 产品2.

root@am57xx-EVM：~# opkg --add-arch armv7ahf-neon：56 install --force-depends libelf1_0.170-r0_arm
v7ahf-none.ipk
root@am57xx-EVM：~# opkg --add-arch armv7ahf-neon：56安装--force-depends ipute2_4.11.0-r0.a
rago3_armv7ahf-none.ipk

此致、
Kemal

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

非常感谢。

在 base-rootfs 中精细安装的软件包：

root@am57xx-EVM：~# opkg --add-arch armv7ahf-neon：56 install --force-depends libelf1_0.170-r0_armv7ahf-none.ipk
在 root 上安装 libelF1 (0.170)
配置 libelF1。
root@am57xx-EVM：~ó n

root@am57xx-EVM：~ó n opkg --add-arch armv7ahf-neon：56安装--force-depends ipute2_4.11.0-r0.arago3_armv7ahf-none.ipk
在 root
用户配置 ipute2上安装 iproute2 (4.11.0)。
更新替代方法：将/sbin/ip 链接到/sbin/ip.iproute2
root@am57xx-EVM：~#

但在测试过程中发现：

在 base-rootfs 中，PRU-prp (eth2和 eth3)中的 ping 为0.5ms。
但在 base-rootfs 中，PRU-prp (eth2和 eth3)中的 ping 太大：0.5 - 10ms：

root@am57xx-EVM：~ ip# ip link add name prp0 type prp slave1 eth2 slave2 eth3 supervision 45
root@am57xx-EVM：~# ifconfig prp0 192.168.14.126 up

root@am57xx-EVM：~# ip link add name prp1000 type prp slaveth0 slavp0 slav1 prp1 evmr es1 root
@~
@~

@~ am57xx-evmr + ip + p1000 root + p1000 evmr es1 root + p57xx evmr ip+ p1000 root + p1000 evmr es1 root + ip+ p1000 evmr es1 root + ip+ p57xx evmr es1 root + ip+ p1000 evm p ifconfig
eth0 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2A
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)
中断：85

eth1 链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2B
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

eth2 链接地址：以太网 HWaddr 70：FF：76：1C：08：91
inet6 addr：fe80：：72ff：76ff：fe1c：891%763612/64范围：链接
运行多播 MTU：1500公制：1的上广播
RX 数据包：119错误：0丢弃：0超限：0帧：0
TX 数据包：81错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：23852 (23.2 KiB) TX 字节：14762 (14.4 KiB)

eth3 链接地址：以太网 HWaddr 70：FF：76：1C：08：92
上广播多播 MTU：1500公制：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

低 链路环状图:本地环回
iNet addr：127.0.0.1掩码：255.0.0.0
inet6 addr:::1%763612/128范围:主机
正在运行 MTU：65536公制：1的上环回
RX 数据包：169错误：0丢弃：0超限：0帧：0
TX 数据包：169错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：13000 (12.6KiB) TX 字节：13000 (12.6KiB)

prp0 链接地址：以太网 HWaddr 70：FF：76：1C：08：91
iNet addr：192.168.14.126 Bcast：192.168.14.255掩码：255.255.255.0
inet6 addr：fe80：：72ff：76ff：fe1c：891%763612/64范围：链接
运行多播 MTU：1494公制：1的上广播
RX 数据包：2错误：0丢弃：0超限：0帧：0
TX 数据包：42错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：391 (391.0 B) TX 字节：7650 (7.4 KiB)

prp1000链路连接：以太网 HWaddr A0：F6：FD：B2：8E：2A
iNet addr：192.168.12.151 Bcast：192.168.12.255掩码：255.255.255.0
向上广播多播 MTU：1494 Metric：1
RX 数据包：0错误：0丢弃：0超限：0帧：0
TX 数据包：0错误：0丢弃：0超限：0载波：0
冲突:0 txqueuelen:1000
RX 字节：0 (0.0 B) TX 字节：0 (0.0 B)

root@am57xx-EVM：~ ping 192.168.14.160
ping 192.168.14.160 (192.168.14.160)：56个数据字节
64字节从192.168.14.160：493=0 TTL=128 time=15.728 ms
从192.168.14.160：seq=1 seq=128 time=5.578ms
从192.168.14.160字节到192.168.14.160：从192.168.14.160：4160：424=14.160字节=5.572ms 64
字节从192.168.14.160：从192.168.14.160： SEQ=3 TTL=128 time=5.407ms
从192.168.14.160开始64字节：TTL=4 TTL=128 time=5.326ms
从192.168.14.160开始64字节：SEQ=5 TTL=128 time=5.264ms
从192.168.14.160开始64字节：TTL=6 TTL=128 time=5.179ms
从192.168.14.160开始64字节：SEQ=7 TTL=128 time=5.113=5.1464字节
从192.168.14.64字节：从192.168.14.160开始
SEQ=9 TTL=128 time=4.958ms
从192.168.14.160开始64字节：SEQ=10 TTL=128 time=4.884ms
从192.168.14.160开始64字节：SEQ=11 TTL=128 time=4.811ms
从192.168.14.160开始64字节：TTL=12 TTL=128 time=4.726ms
从192.168.14.160开始64字节：SEQ=14.13 =128时间=4.650 ms
从192.168.160开始64字节
：从192.168.14.160开始 SEQ=15 TTL=128 time=4.505ms
从192.168.14.160开始64字节：TTL=16 TTL=128 time=4.416ms
从192.168.14.160开始64字节：SEQ=17 TTL=128 time=4.348ms
从192.168.14.160开始64字节：TTL=18 TTL=128 time=4.261ms
从192.168.14.160开始64字节：SEQ=19 TTL=128 time=4.19164ms
从192.168.14.160开始64字节：
从192.168.14.160开始 SEQ=21 TTL=128 time=4.035ms
从192.168.14.160开始64字节：SEQ=22 TTL=128 time=3.956ms
从192.168.14.160开始64字节：SEQ=23 TTL=128 time=3.854ms
从192.168.14.160开始64字节：TTL=24 TTL=128 time=3.787ms
从192.168.14.160开始64字节 SEQ=14.25=128时间=3.64ms
从192.168.160开始：
SEQ=27 TTL=128 time=3.569ms
从192.168.14.160开始64字节：TTL=28 TTL=128 time=3.483ms
从192.168.14.160开始64字节：SEQ=29 TTL=128 time=3.406ms
从192.168.14.160开始64字节：TTL=30 TTL=128 time=3.329ms
从192.168.14.160开始64字节：SEQ=31 TTL=128 time=3.254ms
从192.168.14.160开始64字节：从192.168.14.160开始
SEQ=33 TTL=128 time=3.093ms
从192.168.14.160开始64字节：SEQ=34 TTL=128 time=3.024ms
从192.168.14.160开始64字节：SEQ=35 TTL=128 time=2.947ms
从192.168.14.160开始64字节：TTL=36 TTL=128 time=2.868ms
从192.168.14.160开始64字节：SEQ=14.37=128时间=2.787ms
从192.168.160开始64字节：从192.168.704ms 开始
SEQ=39 TTL=128 Time=2.633ms
从192.168.14.160开始64字节：TTL=40 TTL=128 time=2.557ms
从192.168.14.160开始64字节：SEQ=41 TTL=128 time=2.488ms
从192.168.14.160开始64字节：TTL=42 TTL=128 time=2.402ms
从192.168.14.160开始64字节：SEQ=43 TTL=128 times=2.44ms
从192.168.14.160开始64字节：从192.168.14.160开始
SEQ=45 TTL=128 time=2.190ms
从192.168.14.160开始64字节：SEQ=46 TTL=128 time=2.104ms
从192.168.14.160开始64字节：SEQ=47 TTL=128 time=2.029ms
从192.168.14.160开始64字节：TTL=48 TTL=128 time=1.949ms
从192.168.14.160开始64字节：SEQ=14.49=128时间=1.864

字节从192.168.160开始：从192.168.14.160开始 SEQ=51 TTL=128 Time=1.734ms
从192.168.14.160开始64字节：TTL=52 TTL=128 time=1.655ms
从192.168.14.160开始64字节：SEQ=53 TTL=128 time=1.562ms
从192.168.14.160开始64字节：TTL=54 TTL=128 time=1.480ms
从192.168.32914.160开始64字节：SEQ=55 TTL=128 time=1.64ms
从192.168.14.56ms 开始：
从192.168.160开始 SEQ=57 TTL=128 time=1.248ms
从192.168.14.160开始64字节：867=58 TTL=128 time=1.173ms
从192.168.14.160开始64字节：SEQ=59 TTL=128 time=1.086ms
从192.168.14.160开始64字节：TTL=60 TTL=128 time=1.010ms
从192.168.14.160开始64字节：SEQ=61 TTL=128 time=0.950ms
从192.168.14.62ms 从192.168.160开始：
从192.168.14.160开始64字节：从192.168.14.160开始 101=63 TTL=128 time=0.788ms
从192.168.14.160开始64字节：410=64 TTL=128 time=0.708ms
从192.168.14.160开始64字节：SEQ=65 TTL=128 time=10.637ms
从192.168.14.160开始64字节：TTL=66 TTL=128 time=10.560ms
从192.168.14.160开始64字节：SEQ=67 TTL=128 time=0.492ms
从192.168.14.160开始64字节：
从192.168.14.160开始 SEQ=69 TTL=128 time=10.340ms
从192.168.14.160开始64字节：TTL=70 TTL=128 time=10.258ms
从192.168.14.160开始64字节：SEQ=71 TTL=128 time=10.195ms
从192.168.14.160开始64字节：TTL=72 TTL=128 time=10.108ms
从192.168.14.160开始64字节：SEQ=73 TTL=128 time=14.74ms
从192.168.14.160开始64字节：从192.168.14.160开始
SEQ=75 TTL=128 time=9.872ms
从192.168.14.160开始64字节：SEQ=76 TTL=128 time=9.788ms

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

然后、在MACHINE=am57xx-evm bitbake arago-base-tisdk-image构建时输入最后一步、并在电路板上使用 Arago-base-tisdk-image-am57xx-evm.tar.xz 映像、而不是 Arago-Tina-image-am57xx-evm.tar.xz。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

命令：

cd tisdk
./oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-05.01.00.11-config.txt
cd build
。 CONF/setenv
导出工具链_path_armv7=$HOME/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf
导出工具链_path_armv8=$HOME/gcc-linaro-7.2.1-2017.11-x86_64_aevm=linux-base-archake-bake-gamdk-linux-base-bake-bake-bake-gubake-bake-bake-gover-bake-gover-bake-gub-base-bake-gov

并且机器命令中存在错误：

VL@vlubuntu18：~/tisdk/build machine=am57xx-EVM bitbake Arago-base-tisdk-image
注：您的 conf/bblayers.conf 已自动更新。
注意：您的 conf/bblayers.conf 已自动更新。
正在加载高速缓存：100%|################################ |时间：0：00：09
从依赖项高速缓存加载了4061个条目。
解析配方：100%|############################ |时间：0:01:01:09
解析3159 .bb 文件完成(2573缓存，586解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="标题：7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################### |时间：0：00：09
注：执行 SetScene 任务
注：执行 RunQueue 任务
错误：perf-1.0-R9 DO 配置：在 exec_python _func()中执行 python 函数时出错自动生成：

导致此异常/失败的 python 调用的栈跟踪为：
文件：'Exec_Linethon _func()自动生成，No：2： 
0001：
*** 0002：copy_perf_source_ffrom _kernel (d)
0003：
文件：'/home/vl/tisdk/sources/oe-core/meta/recipes-kernel/perf/perf.bb、行号：148、函数：copy_perf_source_ffrom _kernel
0144：对于源代码中的 s：
0145： src = OE.path.join (src_dir、s)
0146： dest = OE.path.join (dest_dir、s)
0147： 如果 os.path.isdir (src)：
*** 0148： oe.path.copyhardlinktree (src、dest)
0149： 否则：
0150： b.utils.copyfile (src、dest)
0151：｝
0152：
文件：'/home/vl/tisdk/sources/oe-core/meta/lib/oe/path.py、行号：113、函数：copyhardlinktree
0109： 否则：
0110： Source = src
0111： s_dir = os.getcwd()
0112： CMD ='CP -AFL --preserve=xattr %s %s'%(source、os.path.realpath (dst)
)*** 0113： subprocess.check_output(cmd、shell=True、cwd=s_dir、stderr=subprocess.STDOUT)
0114：否则：
0115： copytree (src、dst)
0116：
0117：def remove (path、递归=真)：
文件：'/usr/lib/python3.6/subprocess.py、行号：356、函数：check_output
0352： #空字符串。 这是为了实现向后兼容性而维护的。
0353： kwargs['input']='' if kwargs.get ('universal_newlines '、False) else b''
0354：
0355：return run (* popenargs、stdout=pipe、timeout=timeout、check=True、
*** 0356： kwargs.stdout
0357：
0358：
0359：类 CompletedProcess (object)：
0360：""已完成运行的进程。
文件：'/usr/lib/python3.6/subprocess.py、行号：438、函数：运行
0434： 升高
0435： retcode = process.poll ()
0436： 如果检查并重新编码：
0437： 提升 CalledProcessError (retcode、process.args、
*** 0438： output=stdout、stderr=stderr)
0439：return CompletedProcess (process.args、retcode、stdout、stderr)
0440：
0441：
0442：def list2cmdline(Seq)：
异常：subprocess.CalledProcessError：命令'CP -AFL --preserve=xattr ./*/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include 返回非零退出状态1.

子流程输出：
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/auto.conf 至"./config/auto.conf：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/auto.conf.cmd 至"./config/auto.conf.cmd：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tristate.conf 至"./config/tristate.conf：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/atags.h 至"./config/atags.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crc32.h 至"./config/crc32.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vfp.h 至"./config/vfp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/aeabi.h 至"./config/aeabi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/seccomp.h 至"./config/seccomp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hdmi.h 至"./config/hdmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cm36651.h 至"./config/cm36651.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/glob.h 至"./config/glob.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/swphy.h 至"./config/swphy.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fsnotify.h 至"./config/fsnotify.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/stp.h 至"./config/stp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6.h 至"./config/ipv6.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bql.h 至"./config/bql.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/devtmpfs.h 至"./config/devtmpfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan.h 至"./config/wlan.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/namespaces.h 至"./config/namespaces.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcieaer.h 至"./config/pcieaer.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can.h 至"./config/can.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cfg80211.h 至"./config/cfg80211.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb.h 至"./config/usb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ethernet.h 至"./config/ethernet.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dql.h 至"./config/dql.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/coredump.h 至"./config/coredump.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/printk.h 至"./config/printk.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/timerfd.h 至"./config/timerfd.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bounce.h 至"./config/bounce.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/shmem.h 至"./config/shmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd.h 至"./config/mtd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/migration.h 至"./config/migration.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dnotify.h 至"./config/dnotify.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ata.h 至"./config/ata.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/remoteproc.h 至"./config/remoteproc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vdso.h 至"./config/vdso.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/exportfs.h 至"./config/exportfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serio.h 至"./config/serio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/schedstats.h 至"./config/schedstats.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tigon3.h 至"./config/tigon3.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hwmon.h 至"./config/hwmon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lockd.h 至"./config/lockd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm.h 至"./config/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/standalone.h 至"./config/standalone.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi.h 至"./config/efi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rational.h 至"./config/rational.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/block.h 至"./config/block.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bug.h 至"./config/bug.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm.h 至"./config/pm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pps.h 至"./config/pps.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/memcg.h 至"./config/memcg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi.h 至"./config/spi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/libfdt.h 至"./config/libfdt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vt.h 至"./config/vt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dtc.h 至"./config/dtc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sbitmap.h 至"./config/sbitmap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nls.h 至"./config/nls.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/optee.h 至"./config/optee.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iwlwifi.h 至"./config/iwlwifi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rfkill.h 至"./config/rfkill.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netdevices.h 至"./config/netdevices.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/eventfd.h 至"./config/eventfd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xfrm.h 至"./config/xfrm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bpf.h 至"./config/bpf.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tee.h 至"./config/tee.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dmi.h 至"./config/dmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpusets.h 至"./config/cpusets.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcieportbus.h 至"./config/pcieportbus.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/highmem.h 至"./config/highmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nvmem.h 至"./config/nvmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinconf.h 至"./config/pinconf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lbdaf.h 至"./config/lbdaf.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/swiotlb.h 至"./config/swiotlb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/elfcore.h 至"./config/elfcore.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keys.h 至"./config/keys.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iwlmvm.h 至"./config/iwlmvm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hwspinlock.h 至"./config/hwspinlock.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sram.h 至"./config/sram.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crc16.h 至"./config/crc16.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tmpfs.h 至"./config/tmpfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/futex.h 至"./config/futex.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/isl29003.h 至"./config/isl29003.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma.h 至"./config/bcma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dmadevices.h 至"./config/dmadevices.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinctrl.h 至"./config/pinctrl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sysvipc.h 至"./config/sysvipc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/smsc911x.h 至"./config/smsc911x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00.h 至"./config/rt2x00.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/modules.h 至"./config/modules.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rpmsg.h 至"./config/rpmsg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sound.h 至"./config/sound.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/unix.h 至"./config/unix.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/srcu.h 至"./config/srcu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/membarrier.h 至"./config/membarrier.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xps.h 至"./config/xps.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge.h 至"./config/bridge.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator.h 至"./config/regulator.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2800usb.h 至"./config/rt2800usb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kexec.h 至"./config/kexec.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/e1000e.h 至"./config/e1000e.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/multiuser.h 至"./config/multiuser.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/suspend.h 至"./config/suspend.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ak8975.h 至"./config/ak8975.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/w1.h 至"./config/w1.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/slub.h 至"./config/slub.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c.h 至"./config/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iwldvm.h 至"./config/iwldvm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sunrpc.h 至"./config/sunrpc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kallsyms.h 至"./config/kallsyms.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci.h 至"./config/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm.h 至"./config/pwm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mii.h 至"./config/mii.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/signalfd.h 至"./config/signalfd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/watchdog.h 至"./config/watchdog.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/epoll.h 至"./config/epoll.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net.h 至"./config/net.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vfpv3.h 至"./config/vfpv3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinmux.h 至"./config/pinmux.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/packet.h 至"./config/packet.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet.h 至"./config/inet.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/freezer.h 至"./config/freezer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt.h 至"./config/bt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpiolib.h 至"./config/gpiolib.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uio.h 至"./config/uio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter.h 至"./config/netfilter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/apds9802als.h 至"./config/apds9802als.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spmi.h 至"./config/spmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio.h 至"./config/iio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/skge.h 至"./config/skge.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/smp.h 至"./config/smp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tty.h 至"./config/tty.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/libcrc32c.h 至"./config/libcrc32c.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wl18xx.h 至"./config/wl18xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ras.h 至"./config/ras.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/devmem.h 至"./config/devmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/neon.h 至"./config/neon.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/localversion.h 至"./config/localversion.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto.h 至"./config/crypto.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cmdline.h 至"./config/cmdline.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio.h 至"./config/virtio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uid16.h 至"./config/uid16.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/embedded.h 至"./config/embedded.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mailbox.h 至"./config/mailbox.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/edac.h 至"./config/edac.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/scsi.h 至"./config/scsi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hid.h 至"./config/hid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/jbd2.h 至"./config/jbd2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/phylib.h 至"./config/phylib.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlcore.h 至"./config/wlcore.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kernfs.h 至"./config/kernfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/expert.h 至"./config/expert.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wireless.h 至"./config/wireless.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs.h 至"./config/squashfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroups.h 至"./config/cgroups.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc.h 至"./config/mmc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/brcmfmac.h 至"./config/brcmfmac.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/extcon.h 至"./config/extcon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hz.h 至"./config/hz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nlattr.h 至"./config/nlattr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sysfs.h 至"./config/sysfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb.h 至"./config/fb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal.h 至"./config/thermal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/brcmutil.h 至"./config/brcmutil.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rps.h 至"./config/rps.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/modversions.h 至"./config/modversions.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/compaction.h 至"./config/compaction.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd.h 至"./config/snd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/flatmem.h 至"./config/flatmem.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ikconfig.h 至"./config/ikconfig.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sysctl.h 至"./config/sysctl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs.h 至"./config/cifs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/memory.h 至"./config/memory.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bch.h 至"./config/bch.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcieaspm.h 至"./config/pcieaspm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irqchip.h 至"./config/irqchip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mpu3050.h 至"./config/mpu3050.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pstore.h 至"./config/pstore.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/textsearch.h 至"./config/textsearch.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ks8851.h 至"./config/ks8851.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm.h 至"./config/drm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ics932s401.h 至"./config/ics932s401.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/preempt.h 至"./config/preempt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mwifiex.h 至"./config/mwifiex.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/highpte.h 至"./config/highpte.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/llc.h 至"./config/llc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regmap.h 至"./config/regmap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fhandle.h 至"./config/fhandle.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/swap.h 至"./config/swap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211.h 至"./config/mac80211.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cma.h 至"./config/cma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bitreverse.h 至"./config/bitreverse.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/devport.h 至"./config/devport.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/aio.h 至"./config/aio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of.h 至"./config/of.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input.h 至"./config/input.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmu.h 至"./config/mmu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/e1000.h 至"./config/e1000.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kernel.release 至"./config/kernel.release：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/omap.h 至"./config/arch/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/multiplatform.h 至"./config/arch/multiplatform.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/omap2plus.h 至"./config/arch/omap2plus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/optional/kernel/rwx.h 至"./config/arch/optional/kernel/rwx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/optional/kernel/rwx/default.h 至"./config/arch/optional/kernel/rwx/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/omap2plus/typical.h 至"./config/arch/omap2plus/typical.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/multi/v7.h 至"./config/arch/multi/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/multi/v6/v7.h 至"./config/arch/multi/v6/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/bandgap.h 至"./config/arch/has/bandgap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/set/memory.h 至"./config/arch/has/set/memory.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/devmem/is/allowed.h 至"./config/arch/has/devmem/is/allowed.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/sg/chain.h 至"./config/arch/has/sg/chain.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/elf/randomize.h 至"./config/arch/has/elf/randomize.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/holes/memorymodel.h 至"./config/arch/has/holes/memorymodel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/debug/virtual.h 至"./config/arch/has/debug/virtual.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/strict/kernel/rwx.h 至"./config/arch/has/strict/kernel/rwx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/strict/module/rwx.h 至"./config/arch/has/strict/module/rwx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/gcov/profile/all.h 至"./config/arch/has/gcov/profile/all.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/has/tick/broadcast.h 至"./config/arch/has/tick/broadcast.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/suspend/possible.h 至"./config/arch/suspend/possible.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/want/ipc/parse/version.h 至"./config/arch/want/ipc/parse/version.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/want/general/hugetlb.h 至"./config/arch/want/general/hugetlb.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/clocksource/data.h 至"./config/arch/clocksource/data.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/use/builtin/bswap.h 至"./config/arch/use/builtin/bswap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/use/cmpxchg/lockref.h 至"./config/arch/use/cmpxchg/lockref.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/supports/uprobes.h 至"./config/arch/supports/uprobes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/supports/atomic/rmw.h 至"./config/arch/supports/atomic/rmw.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/mmap/rnd/bits.h 至"./config/arch/mmap/rnd/bits.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/mmap/rnd/bits/max.h 至"./config/arch/mmap/rnd/bits/max.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/mmap/rnd/bits/min.h 至"./config/arch/mmap/rnd/bits/min.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/hibernation/possible.h 至"./config/arch/hibernation/possible.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/might/have/pc/parport.h 至"./config/arch/might/have/pc/parport.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/nr/gpio.h 至"./config/arch/nr/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/phys/addr/t/64bit.h 至"./config/arch/phys/addr/t/64bit.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arch/have/custom/gpio/h.h 至"./config/arch/have/custom/gpio/h.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/ide.h 至"./config/have/ide.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/clk.h 至"./config/have/clk.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/optprobes.h 至"./config/have/optprobes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kprobes.h 至"./config/have/kprobes.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/nmi.h 至"./config/have/nmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/uid16.h 至"./config/have/uid16.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kretprobes.h 至"./config/have/kretprobes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/smp.h 至"./config/have/smp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/oprofile.h 至"./config/have/oprofile.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/memblock.h 至"./config/have/memblock.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/auditsyscall.h 至"./config/have/arch/auditsyscall.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/bitreverse.h 至"./config/have/arch/bitreverse.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/kgdb.h 至"./config/have/arch/kgdb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/tracehook.h 至"./config/have/arch/tracehook.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/seccomp/filter.h 至"./config/have/arch/seccomp/filter.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/mmap/rnd/bits.h 至"./config/have/arch/mmap/rnd/bits.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/jump/label.h 至"./config/have/arch/jump/label.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/pfn/valid.h 至"./config/have/arch/pfn/valid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arch/transparent/hugepage.h 至"./config/have/arch/transparent/hugepage.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kernel/lzma.h 至"./config/have/kernel/lzma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kernel/xz.h 至"./config/have/kernel/xz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kernel/lz4.h 至"./config/have/kernel/lz4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kernel/gzip.h 至"./config/have/kernel/gzip.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/kernel/lzo.h 至"./config/have/kernel/lzo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/irq/time/accounting.h 至"./config/have/irq/time/accounting.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arm/scu.h 至"./config/have/arm/scu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arm/smccc.h 至"./config/have/arm/smccc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/arm/arch/timer.h 至"./config/have/arm/arch/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/proc/cpu.h 至"./config/have/proc/cpu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/dma/contiguous.h 至"./config/have/dma/contiguous.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/dma/api/debug.h 至"./config/have/dma/api/debug.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/rcu/table/free.h 至"./config/have/rcu/table/free.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/context/tracking.h 至"./config/have/context/tracking.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/ebpf/jit.h 至"./config/have/ebpf/jit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/dynamic/ftrace.h 至"./config/have/dynamic/ftrace.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/dynamic/ftrace/with/regs.h 至"./config/have/dynamic/ftrace/with/regs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/regs/and/stack/access/api.h 至"./config/have/regs/and/stack/access/api.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/virt/cpu/accounting/gen.h 至"./config/have/virt/cpu/accounting/gen.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/perf/regs.h 至"./config/have/perf/regs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/perf/events.h 至"./config/have/perf/events.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/perf/user/stack/dump.h 至"./config/have/perf/user/stack/dump.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/debug/kmemleak.h 至"./config/have/debug/kmemleak.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/function/tracer.h 至"./config/have/function/tracer.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/function/graph/tracer.h 至"./config/have/function/graph/tracer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/hw/breakpoint.h 至"./config/have/hw/breakpoint.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/net/dsa.h 至"./config/have/net/dsa.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/clk/prepare.h 至"./config/have/clk/prepare.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/hardened/usercopy/allocator.h 至"./config/have/hardened/usercopy/allocator.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/ftrace/mcount/record.h 至"./config/have/ftrace/mcount/record.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/generic/gup.h 至"./config/have/generic/gup.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/generic/dma/coherent.h 至"./config/have/generic/dma/coherent.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/cc/stackprotector.h 至"./config/have/cc/stackprotector.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/gcc/plugins.h 至"./config/have/gcc/plugins.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/exit/thread.h 至"./config/have/exit/thread.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/syscall/tracepoints.h 至"./config/have/syscall/tracepoints.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/c/recordmcount.h 至"./config/have/c/recordmcount.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/mod/arch/specific.h 至"./config/have/mod/arch/specific.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/have/efficient/unaligned/access.h 至"./config/have/efficient/unaligned/access.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc.h 至"./config/snd/soc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/usb.h 至"./config/snd/usb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/hwdep.h 至"./config/snd/hwdep.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/rawmidi.h 至"./config/snd/rawmidi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/pcm.h 至"./config/snd/pcm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/jack.h 至"./config/snd/jack.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/drivers.h 至"./config/snd/drivers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/timer.h 至"./config/snd/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/proc/fs.h 至"./config/snd/proc/fs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/spdif.h 至"./config/snd/soc/spdif.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/tlv320aic3x.h 至"./config/snd/soc/tlv320aic3x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/tlv320aic31xx.h 至"./config/snd/soc/tlv320aic31xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/generic/dmaengine/pcm.h 至"./config/snd/soc/generic/dmaengine/pcm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/i2c/and/spi.h 至"./config/snd/soc/i2c/and/spi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/soc/hdmi/codec.h 至"./config/snd/soc/hdmi/codec.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/usb/audio.h 至"./config/snd/usb/audio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/dmaengine/pcm.h 至"./config/snd/dmaengine/pcm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/davinci/soc/mcasp.h 至"./config/snd/davinci/soc/mcasp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/simple/card.h 至"./config/snd/simple/card.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/simple/scu/card.h 至"./config/snd/simple/scu/card.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/simple/card/utils.h 至"./config/snd/simple/card/utils.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/omap/soc.h 至"./config/snd/omap/soc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/omap/soc/hdmi/audio.h 至"./config/snd/omap/soc/hdmi/audio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/dynamic/minors.h 至"./config/snd/dynamic/minors.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/pcm/iec958.h 至"./config/snd/pcm/iec958.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/pcm/eld.h 至"./config/snd/pcm/eld.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/pcm/timer.h 至"./config/snd/pcm/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/jack/input/dev.h 至"./config/snd/jack/input/dev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/hda/prealloc/size.h 至"./config/snd/hda/prealloc/size.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/verbose/procfs.h 至"./config/snd/verbose/procfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/max/cards.h 至"./config/snd/max/cards.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/support/old/api.h 至"./config/snd/support/old/api.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/snd/edma/soc.h 至"./config/snd/edma/soc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/scsi/dma.h 至"./config/scsi/dma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/scsi/mod.h 至"./config/scsi/mod.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/scsi/lowlevel.h 至"./config/scsi/lowlevel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/scsi/proc/fs.h 至"./config/scsi/proc/fs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/twl6040/core.h 至"./config/twl6040/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/keyboard.h 至"./config/input/keyboard.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/adxl34x.h 至"./config/input/adxl34x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/mouse.h 至"./config/input/mouse.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/joydev.h 至"./config/input/joydev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/matrixkmap.h 至"./config/input/matrixkmap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/misc.h 至"./config/input/misc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/evdev.h 至"./config/input/evdev.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/leds.h 至"./config/input/leds.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/touchscreen.h 至"./config/input/touchscreen.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/polldev.h 至"./config/input/polldev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/adxl34x/spi.h 至"./config/input/adxl34x/spi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/adxl34x/i2c.h 至"./config/input/adxl34x/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/input/gpio/decoder.h 至"./config/input/gpio/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/memory/isolation.h 至"./config/memory/isolation.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/slub/cpu/partial.h 至"./config/slub/cpu/partial.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/edma.h 至"./config/ti/edma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/prueth.h 至"./config/ti/prueth.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/pipe3.h 至"./config/ti/pipe3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cpts.h 至"./config/ti/cpts.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cpsw.h 至"./config/ti/cpsw.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/thermal.h 至"./config/ti/thermal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/dss6.h 至"./config/ti/dss6.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cppi41.h 至"./config/ti/cppi41.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/1pps/dm/timer.h 至"./config/ti/1pps/dm/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/ptp/bc.h 至"./config/ti/ptp/bc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cpsw/ale.h 至"./config/ti/cpsw/ale.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cpsw/phy/sel.h 至"./config/ti/cpsw/phy/sel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/soc/thermal.h 至"./config/ti/soc/thermal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/dma/crossbar.h 至"./config/ti/dma/crossbar.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/davinci/mdio.h 至"./config/ti/davinci/mdio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/davinci/cpdma.h 至"./config/ti/davinci/cpdma.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/cpts/mod.h 至"./config/ti/cpts/mod.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ti/am335x/adc.h 至"./config/ti/am335x/adc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rfs/accel.h 至"./config/rfs/accel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/legacy.h 至"./config/drm/legacy.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/tidss.h 至"./config/drm/tidss.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/bridge.h 至"./config/drm/bridge.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap.h 至"./config/drm/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/tilcdc.h 至"./config/drm/tilcdc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/vm.h 至"./config/drm/vm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/panel.h 至"./config/drm/panel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/kms/helper.h 至"./config/drm/kms/helper.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/kms/fb/helper.h 至"./config/drm/kms/fb/helper.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/kms/cma/helper.h 至"./config/drm/kms/cma/helper.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/i2c/nxp/tda998x.h 至"./config/drm/i2c/nxp/tda998x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/wb.h 至"./config/drm/omap/wb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/encoder/tpd12s015.h 至"./config/drm/omap/encoder/tpd12s015.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/encoder/sii9022.h 至"./config/drm/omap/encoder/sii9022.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/encoder/tc358768.h 至"./config/drm/omap/encoder/tc358768.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/encoder/tfp410.h 至"./config/drm/omap/encoder/tfp410.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/encoder/sii9022/audio/codec.h 至"./config/drm/omap/encoder/sii9022/audio/codec.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/connector/dvi.h 至"./config/drm/omap/connector/dvi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/connector/hdmi.h 至"./config/drm/omap/connector/hdmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/dra7evm/encoder/tpd12s015.h 至"./config/drm/omap/dra7evm/encoder/tpd12s015.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/omap/panel/dpi.h 至"./config/drm/omap/panel/dpi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/panel/simple.h 至"./config/drm/panel/simple.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/panel/bridge.h 至"./config/drm/panel/bridge.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/gem/cma/helper.h 至"./config/drm/gem/cma/helper.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/fbdev/emulation.h 至"./config/drm/fbdev/emulation.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/fbdev/overalloc.h 至"./config/drm/fbdev/overalloc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/drm/tidss/dss7.h 至"./config/drm/tidss/dss7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/boardinfo.h 至"./config/i2c/boardinfo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/mux.h 至"./config/i2c/mux.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/omap.h 至"./config/i2c/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/slave.h 至"./config/i2c/slave.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/algobit.h 至"./config/i2c/algobit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/emev2.h 至"./config/i2c/emev2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/compat.h 至"./config/i2c/compat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/chardev.h 至"./config/i2c/chardev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/mux/pinctrl.h 至"./config/i2c/mux/pinctrl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/mux/pca954x.h 至"./config/i2c/mux/pca954x.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/demux/pinctrl.h 至"./config/i2c/demux/pinctrl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/slave/eeprom.h 至"./config/i2c/slave/eeprom.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/helper/auto.h 至"./config/i2c/helper/auto.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/i2c/arb/gpio/challenge.h 至"./config/i2c/arb/gpio/challenge.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat.h 至"./config/nf/nat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/conntrack.h 至"./config/nf/conntrack.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/needed.h 至"./config/nf/nat/needed.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/ipv4.h 至"./config/nf/nat/ipv4.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/proto/sctp.h 至"./config/nf/nat/proto/sctp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/proto/dccp.h 至"./config/nf/nat/proto/dccp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/proto/udplite.h 至"./config/nf/nat/proto/udplite.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/nat/masquerade/ipv4.h 至"./config/nf/nat/masquerade/ipv4.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/ct/proto/dccp.h 至"./config/nf/ct/proto/dccp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/ct/proto/sctp.h 至"./config/nf/ct/proto/sctp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/ct/proto/udplite.h 至"./config/nf/ct/proto/udplite.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/conntrack/procfs.h 至"./config/nf/conntrack/procfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/conntrack/ipv4.h 至"./config/nf/conntrack/ipv4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nf/defrag/ipv4.h 至"./config/nf/defrag/ipv4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/jvc/decoder.h 至"./config/ir/jvc/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/mce/kbd/decoder.h 至"./config/ir/mce/kbd/decoder.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/sharp/decoder.h 至"./config/ir/sharp/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/nec/decoder.h 至"./config/ir/nec/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/xmp/decoder.h 至"./config/ir/xmp/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/sony/decoder.h 至"./config/ir/sony/decoder.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/sanyo/decoder.h 至"./config/ir/sanyo/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/rc6/decoder.h 至"./config/ir/rc6/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ir/rc5/decoder.h 至"./config/ir/rc5/decoder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs.h 至"./config/usb/configfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/functionfs.h 至"./config/usb/functionfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/phy.h 至"./config/usb/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/isp1760.h 至"./config/usb/isp1760.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/storage.h 至"./config/usb/storage.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/isp1301.h 至"./config/usb/isp1301.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/common.h 至"./config/usb/common.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gspca.h 至"./config/usb/gspca.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/pci.h 至"./config/usb/pci.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/serial.h 至"./config/usb/serial.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/acm.h 至"./config/usb/acm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/hid.h 至"./config/usb/hid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gadget.h 至"./config/usb/gadget.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/libcomposite.h 至"./config/usb/libcomposite.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/belkin.h 至"./config/usb/belkin.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gadgetfs.h 至"./config/usb/gadgetfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/test.h 至"./config/usb/test.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/armlinux.h 至"./config/usb/armlinux.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/eth.h 至"./config/usb/eth.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/rtl8152.h 至"./config/usb/rtl8152.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/audio.h 至"./config/usb/audio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/zero.h 至"./config/usb/zero.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/pegasus.h 至"./config/usb/pegasus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/dwc3.h 至"./config/usb/dwc3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/support.h 至"./config/usb/support.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/usbnet.h 至"./config/usb/usbnet.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/ncm.h 至"./config/usb/configfs/ncm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/obex.h 至"./config/usb/configfs/obex.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/rndis.h 至"./config/usb/configfs/rndis.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/acm.h 至"./config/usb/configfs/acm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/ecm.h 至"./config/usb/configfs/ecm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/serial.h 至"./config/usb/configfs/serial.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/eem.h 至"./config/usb/configfs/eem.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/hid.h 至"./config/usb/configfs/f/hid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/fs.h 至"./config/usb/configfs/f/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/midi.h 至"./config/usb/configfs/f/midi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/uvc.h 至"./config/usb/configfs/f/uvc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/uac1.h 至"./config/usb/configfs/f/uac1.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/printer.h 至"./config/usb/configfs/f/printer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/uac2.h 至"./config/usb/configfs/f/uac2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/f/lb/ss.h 至"./config/usb/configfs/f/lb/ss.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/ecm/subset.h 至"./config/usb/configfs/ecm/subset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/configfs/mass/storage.h 至"./config/usb/configfs/mass/storage.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/serial.h 至"./config/usb/g/serial.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/ncm.h 至"./config/usb/g/ncm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/printer.h 至"./config/usb/g/printer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/multi.h 至"./config/usb/g/multi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/hid.h 至"./config/usb/g/hid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/dbgp.h 至"./config/usb/g/dbgp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/webcam.h 至"./config/usb/g/webcam.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/multi/cdc.h 至"./config/usb/g/multi/cdc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/multi/rndis.h 至"./config/usb/g/multi/rndis.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/dbgp/serial.h 至"./config/usb/g/dbgp/serial.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/g/acm/ms.h 至"./config/usb/g/acm/ms.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/eem.h 至"./config/usb/f/eem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/fs.h 至"./config/usb/f/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/serial.h 至"./config/usb/f/serial.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/uac2.h 至"./config/usb/f/uac2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/uvc.h 至"./config/usb/f/uvc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/rndis.h 至"./config/usb/f/rndis.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/midi.h 至"./config/usb/f/midi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/subset.h 至"./config/usb/f/subset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/acm.h 至"./config/usb/f/acm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/printer.h 至"./config/usb/f/printer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/hid.h 至"./config/usb/f/hid.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/obex.h 至"./config/usb/f/obex.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/ncm.h 至"./config/usb/f/ncm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/ecm.h 至"./config/usb/f/ecm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/uac1.h 至"./config/usb/f/uac1.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/ss/lb.h 至"./config/usb/f/ss/lb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/f/mass/storage.h 至"./config/usb/f/mass/storage.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ti/cppi41/dma.h 至"./config/usb/ti/cppi41/dma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ohci/hcd.h 至"./config/usb/ohci/hcd.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ohci/little/endian.h 至"./config/usb/ohci/little/endian.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ohci/hcd/platform.h 至"./config/usb/ohci/hcd/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ohci/hcd/pci.h 至"./config/usb/ohci/hcd/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/serial/ftdi/sio.h 至"./config/usb/serial/ftdi/sio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/u/audio.h 至"./config/usb/u/audio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/u/serial.h 至"./config/usb/u/serial.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/u/ether.h 至"./config/usb/u/ether.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gpio/vbus.h 至"./config/usb/gpio/vbus.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/video/class.h 至"./config/usb/video/class.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/video/class/input/evdev.h 至"./config/usb/video/class/input/evdev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/isp1761/udc.h 至"./config/usb/isp1761/udc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/net1080.h 至"./config/usb/net/net1080.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/ax8817x.h 至"./config/usb/net/ax8817x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/drivers.h 至"./config/usb/net/drivers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/smsc95xx.h 至"./config/usb/net/smsc95xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/cdcether.h 至"./config/usb/net/cdcether.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/smsc75xx.h 至"./config/usb/net/smsc75xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/zaurus.h 至"./config/usb/net/zaurus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/cdc/subset.h 至"./config/usb/net/cdc/subset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/cdc/ncm.h 至"./config/usb/net/cdc/ncm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/cdc/subset/enable.h 至"./config/usb/net/cdc/subset/enable.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/net/ax88179/178a.h 至"./config/usb/net/ax88179/178a.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/am35x.h 至"./config/usb/musb/am35x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/hdrc.h 至"./config/usb/musb/hdrc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/omap2plus.h 至"./config/usb/musb/omap2plus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/dsps.h 至"./config/usb/musb/dsps.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/am335x/child.h 至"./config/usb/musb/am335x/child.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/musb/dual/role.h 至"./config/usb/musb/dual/role.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ehci/pci.h 至"./config/usb/ehci/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ehci/hcd.h 至"./config/usb/ehci/hcd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ehci/hcd/platform.h 至"./config/usb/ehci/hcd/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ehci/hcd/omap.h 至"./config/usb/ehci/hcd/omap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/ehci/tt/newsched.h 至"./config/usb/ehci/tt/newsched.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/mass/storage.h 至"./config/usb/mass/storage.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/isp1760/hcd.h 至"./config/usb/isp1760/hcd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/isp1760/dual/role.h 至"./config/usb/isp1760/dual/role.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/eth/rndis.h 至"./config/usb/eth/rndis.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gadget/storage/num/buffers.h 至"./config/usb/gadget/storage/num/buffers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/gadget/vbus/draw.h 至"./config/usb/gadget/vbus/draw.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/functionfs/rndis.h 至"./config/usb/functionfs/rndis.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/functionfs/generic.h 至"./config/usb/functionfs/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/functionfs/eth.h 至"./config/usb/functionfs/eth.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/xhci/platform.h 至"./config/usb/xhci/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/xhci/hcd.h 至"./config/usb/xhci/hcd.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/xhci/pci.h 至"./config/usb/xhci/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/r8a66597/hcd.h 至"./config/usb/r8a66597/hcd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/dwc3/omap.h 至"./config/usb/dwc3/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/dwc3/of/simple.h 至"./config/usb/dwc3/of/simple.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/dwc3/dual/role.h 至"./config/usb/dwc3/dual/role.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/arch/has/hcd.h 至"./config/usb/arch/has/hcd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/cdc/composite.h 至"./config/usb/cdc/composite.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/default/persist.h 至"./config/usb/default/persist.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/usb/midi/gadget.h 至"./config/usb/midi/gadget.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/advanced.h 至"./config/netfilter/advanced.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xtables.h 至"./config/netfilter/xtables.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/ingress.h 至"./config/netfilter/ingress.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/mark.h 至"./config/netfilter/xt/mark.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/nat.h 至"./config/netfilter/xt/nat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/cpu.h 至"./config/netfilter/xt/match/cpu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/mark.h 至"./config/netfilter/xt/match/mark.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/length.h 至"./config/netfilter/xt/match/length.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/multiport.h 至"./config/netfilter/xt/match/multiport.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/pkttype.h 至"./config/netfilter/xt/match/pkttype.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/comment.h 至"./config/netfilter/xt/match/comment.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/iprange.h 至"./config/netfilter/xt/match/iprange.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/policy.h 至"./config/netfilter/xt/match/policy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/sctp.h 至"./config/netfilter/xt/match/sctp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/mac.h 至"./config/netfilter/xt/match/mac.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/match/limit.h 至"./config/netfilter/xt/match/limit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/target/classify.h 至"./config/netfilter/xt/target/classify.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/target/mark.h 至"./config/netfilter/xt/target/mark.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/netfilter/xt/target/idletimer.h 至"./config/netfilter/xt/target/idletimer.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/cyapa.h 至"./config/mouse/cyapa.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2.h 至"./config/mouse/ps2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/elan/i2c.h 至"./config/mouse/elan/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/elan/i2c/i2c.h 至"./config/mouse/elan/i2c/i2c.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/smbus.h 至"./config/mouse/ps2/smbus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/byd.h 至"./config/mouse/ps2/byd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/elantech.h 至"./config/mouse/ps2/elantech.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/cypress.h 至"./config/mouse/ps2/cypress.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/logips2pp.h 至"./config/mouse/ps2/logips2pp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/alps.h 至"./config/mouse/ps2/alps.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/focaltech.h 至"./config/mouse/ps2/focaltech.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/trackpoint.h 至"./config/mouse/ps2/trackpoint.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/synaptics.h 至"./config/mouse/ps2/synaptics.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mouse/ps2/synaptics/smbus.h 至"./config/mouse/ps2/synaptics/smbus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/thermal.h 至"./config/cpu/thermal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq.h 至"./config/cpu/freq.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/cp15.h 至"./config/cpu/cp15.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/idle.h 至"./config/cpu/idle.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/rmap.h 至"./config/cpu/rmap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/pm.h 至"./config/cpu/pm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/v7.h 至"./config/cpu/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/32v7.h 至"./config/cpu/32v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/32v6k.h 至"./config/cpu/32v6k.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/stat.h 至"./config/cpu/freq/stat.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/conservative.h 至"./config/cpu/freq/gov/conservative.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/ondemand.h 至"./config/cpu/freq/gov/ondemand.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/common.h 至"./config/cpu/freq/gov/common.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/performance.h 至"./config/cpu/freq/gov/performance.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/userspace.h 至"./config/cpu/freq/gov/userspace.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/powersave.h 至"./config/cpu/freq/gov/powersave.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/schedutil.h 至"./config/cpu/freq/gov/schedutil.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/gov/attr/set.h 至"./config/cpu/freq/gov/attr/set.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/freq/default/gov/ondemand.h 至"./config/cpu/freq/default/gov/ondemand.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/idle/gov/menu.h 至"./config/cpu/idle/gov/menu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/idle/gov/ladder.h 至"./config/cpu/idle/gov/ladder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/idle/multiple/drivers.h 至"./config/cpu/idle/multiple/drivers.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/cache/vipt.h 至"./config/cpu/cache/vipt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/cache/v7.h 至"./config/cpu/cache/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/tlb/v7.h 至"./config/cpu/tlb/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/copy/v6.h 至"./config/cpu/copy/v6.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/cp15/mmu.h 至"./config/cpu/cp15/mmu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/has/asid.h 至"./config/cpu/has/asid.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/pabrt/v7.h 至"./config/cpu/pabrt/v7.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/abrt/ev7.h 至"./config/cpu/abrt/ev7.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpu/thumb/capable.h 至"./config/cpu/thumb/capable.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/ecam.h 至"./config/pci/ecam.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/msi.h 至"./config/pci/msi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/dra7xx.h 至"./config/pci/dra7xx.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/label.h 至"./config/pci/label.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/quirks.h 至"./config/pci/quirks.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/domains.h 至"./config/pci/domains.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/syscall.h 至"./config/pci/syscall.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/endpoint.h 至"./config/pci/endpoint.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/endpoint/test.h 至"./config/pci/endpoint/test.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/endpoint/configfs.h 至"./config/pci/endpoint/configfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/dra7xx/host.h 至"./config/pci/dra7xx/host.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/dra7xx/ep.h 至"./config/pci/dra7xx/ep.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/host/generic.h 至"./config/pci/host/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/host/common.h 至"./config/pci/host/common.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/msi/irq/domain.h 至"./config/pci/msi/irq/domain.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/domains/generic.h 至"./config/pci/domains/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pci/epf/test.h 至"./config/pci/epf/test.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/high/res/timers.h 至"./config/high/res/timers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/ocp2scp.h 至"./config/omap/ocp2scp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/usb2.h 至"./config/omap/usb2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/irqchip.h 至"./config/omap/irqchip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/interconnect.h 至"./config/omap/interconnect.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/iommu.h 至"./config/omap/iommu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/watchdog.h 至"./config/omap/watchdog.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/gpmc.h 至"./config/omap/gpmc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/remoteproc.h 至"./config/omap/remoteproc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/pm/noop.h 至"./config/omap/pm/noop.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/control/phy.h 至"./config/omap/control/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/reset/clocks.h 至"./config/omap/reset/clocks.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/32k/timer.h 至"./config/omap/32k/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/dm/timer.h 至"./config/omap/dm/timer.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/mbox/kfifo/size.h 至"./config/omap/mbox/kfifo/size.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/interconnect/barrier.h 至"./config/omap/interconnect/barrier.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/dss/base.h 至"./config/omap/dss/base.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap/iommu/debug.h 至"./config/omap/iommu/debug.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dra752/thermal.h 至"./config/dra752/thermal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vlan/8021q.h 至"./config/vlan/8021q.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uevent/helper.h 至"./config/uevent/helper.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uevent/helper/path.h 至"./config/uevent/helper/path.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fix/earlycon/mem.h 至"./config/fix/earlycon/mem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/triggers.h 至"./config/leds/triggers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/pwm.h 至"./config/leds/pwm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/tlc591xx.h 至"./config/leds/tlc591xx.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/gpio.h 至"./config/leds/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/class.h 至"./config/leds/class.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/heartbeat.h 至"./config/leds/trigger/heartbeat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/camera.h 至"./config/leds/trigger/camera.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/timer.h 至"./config/leds/trigger/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/backlight.h 至"./config/leds/trigger/backlight.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/gpio.h 至"./config/leds/trigger/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/oneshot.h 至"./config/leds/trigger/oneshot.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/cpu.h 至"./config/leds/trigger/cpu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/transient.h 至"./config/leds/trigger/transient.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/trigger/default/on.h 至"./config/leds/trigger/default/on.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/leds/class/flash.h 至"./config/leds/class/flash.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec.h 至"./config/xz/dec.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/ia64.h 至"./config/xz/dec/ia64.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/x86.h 至"./config/xz/dec/x86.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/bcj.h 至"./config/xz/dec/bcj.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/powerpc.h 至"./config/xz/dec/powerpc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/sparc.h 至"./config/xz/dec/sparc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/arm.h 至"./config/xz/dec/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xz/dec/armthumb.h 至"./config/xz/dec/armthumb.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inotify/user.h 至"./config/inotify/user.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/netfilter.h 至"./config/bridge/netfilter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/redirect.h 至"./config/bridge/ebt/redirect.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/arpreply.h 至"./config/bridge/ebt/arpreply.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/limit.h 至"./config/bridge/ebt/limit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/vlan.h 至"./config/bridge/ebt/vlan.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/pkttype.h 至"./config/bridge/ebt/pkttype.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/ip6.h 至"./config/bridge/ebt/ip6.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/dnat.h 至"./config/bridge/ebt/dnat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/snat.h 至"./config/bridge/ebt/snat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/broute.h 至"./config/bridge/ebt/broute.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/among.h 至"./config/bridge/ebt/among.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/ip.h 至"./config/bridge/ebt/ip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/mark.h 至"./config/bridge/ebt/mark.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/log.h 至"./config/bridge/ebt/log.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/stp.h 至"./config/bridge/ebt/stp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/arp.h 至"./config/bridge/ebt/arp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/nflog.h 至"./config/bridge/ebt/nflog.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/t/filter.h 至"./config/bridge/ebt/t/filter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/t/nat.h 至"./config/bridge/ebt/t/nat.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/802/3.h 至"./config/bridge/ebt/802/3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/ebt/mark/t.h 至"./config/bridge/ebt/mark/t.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/nf/ebtables.h 至"./config/bridge/nf/ebtables.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bridge/igmp/snooping.h 至"./config/bridge/igmp/snooping.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/network/filesystems.h 至"./config/network/filesystems.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/module/unload.h 至"./config/module/unload.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/module/force/unload.h 至"./config/module/force/unload.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/module/force/load.h 至"./config/module/force/load.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/module/srcversion/all.h 至"./config/module/srcversion/all.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/md4.h 至"./config/crypto/md4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aead.h 至"./config/crypto/aead.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/rng2.h 至"./config/crypto/rng2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/hmac.h 至"./config/crypto/hmac.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/authenc.h 至"./config/crypto/authenc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/des.h 至"./config/crypto/des.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/kpp2.h 至"./config/crypto/kpp2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user.h 至"./config/crypto/user.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/workqueue.h 至"./config/crypto/workqueue.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha512.h 至"./config/crypto/sha512.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/null.h 至"./config/crypto/null.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/deflate.h 至"./config/crypto/deflate.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/jitterentropy.h 至"./config/crypto/jitterentropy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/gcm.h 至"./config/crypto/gcm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/kpp.h 至"./config/crypto/kpp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ccm.h 至"./config/crypto/ccm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/rng.h 至"./config/crypto/rng.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/md5.h 至"./config/crypto/md5.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/echainiv.h 至"./config/crypto/echainiv.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/hw.h 至"./config/crypto/hw.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/gf128mul.h 至"./config/crypto/gf128mul.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/hash2.h 至"./config/crypto/hash2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/algapi.h 至"./config/crypto/algapi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/hash.h 至"./config/crypto/hash.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/cbc.h 至"./config/crypto/cbc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/manager2.h 至"./config/crypto/manager2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/test.h 至"./config/crypto/test.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ecb.h 至"./config/crypto/ecb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha1.h 至"./config/crypto/sha1.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/acomp2.h 至"./config/crypto/acomp2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/lzo.h 至"./config/crypto/lzo.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/akcipher2.h 至"./config/crypto/akcipher2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aes.h 至"./config/crypto/aes.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ecdh.h 至"./config/crypto/ecdh.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha256.h 至"./config/crypto/sha256.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/cryptd.h 至"./config/crypto/cryptd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/crc32c.h 至"./config/crypto/crc32c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/arc4.h 至"./config/crypto/arc4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/manager.h 至"./config/crypto/manager.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/seqiv.h 至"./config/crypto/seqiv.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/drbg.h 至"./config/crypto/drbg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/engine.h 至"./config/crypto/engine.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/chacha20.h 至"./config/crypto/chacha20.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ctr.h 至"./config/crypto/ctr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/null2.h 至"./config/crypto/null2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/blkcipher2.h 至"./config/crypto/blkcipher2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/cmac.h 至"./config/crypto/cmac.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ghash.h 至"./config/crypto/ghash.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/simd.h 至"./config/crypto/simd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/blkcipher.h 至"./config/crypto/blkcipher.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aead2.h 至"./config/crypto/aead2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/algapi2.h 至"./config/crypto/algapi2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/manager/disable/tests.h 至"./config/crypto/manager/disable/tests.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/dev/virtio.h 至"./config/crypto/dev/virtio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/dev/omap.h 至"./config/crypto/dev/omap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/dev/omap/aes.h 至"./config/crypto/dev/omap/aes.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/dev/omap/des.h 至"./config/crypto/dev/omap/des.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/dev/omap/sham.h 至"./config/crypto/dev/omap/sham.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/drbg/menu.h 至"./config/crypto/drbg/menu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/drbg/hmac.h 至"./config/crypto/drbg/hmac.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/crc32/arm/ce.h 至"./config/crypto/crc32/arm/ce.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha1/arm.h 至"./config/crypto/sha1/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha1/arm/ce.h 至"./config/crypto/sha1/arm/ce.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha1/arm/neon.h 至"./config/crypto/sha1/arm/neon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha2/arm/ce.h 至"./config/crypto/sha2/arm/ce.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha256/arm.h 至"./config/crypto/sha256/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user/api.h 至"./config/crypto/user/api.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user/api/hash.h 至"./config/crypto/user/api/hash.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user/api/aead.h 至"./config/crypto/user/api/aead.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user/api/rng.h 至"./config/crypto/user/api/rng.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/user/api/skcipher.h 至"./config/crypto/user/api/skcipher.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aes/arm.h 至"./config/crypto/aes/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aes/arm/ce.h 至"./config/crypto/aes/arm/ce.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/aes/arm/bs.h 至"./config/crypto/aes/arm/bs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/chacha20/neon.h 至"./config/crypto/chacha20/neon.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/rng/default.h 至"./config/crypto/rng/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/ghash/arm/ce.h 至"./config/crypto/ghash/arm/ce.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crypto/sha512/arm.h 至"./config/crypto/sha512/arm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/possible.h 至"./config/bcma/possible.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/sflash.h 至"./config/bcma/sflash.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/host/pci.h 至"./config/bcma/host/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/host/soc.h 至"./config/bcma/host/soc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/host/pci/possible.h 至"./config/bcma/host/pci/possible.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/driver/gpio.h 至"./config/bcma/driver/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/driver/pci.h 至"./config/bcma/driver/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bcma/driver/gmac/cmn.h 至"./config/bcma/driver/gmac/cmn.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sata/mv.h 至"./config/sata/mv.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sata/pmp.h 至"./config/sata/pmp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sata/ahci.h 至"./config/sata/ahci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sata/ahci/platform.h 至"./config/sata/ahci/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/of.h 至"./config/thermal/of.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/emulation.h 至"./config/thermal/emulation.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/hwmon.h 至"./config/thermal/hwmon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/gov/bang/bang.h 至"./config/thermal/gov/bang/bang.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/gov/fair/share.h 至"./config/thermal/gov/fair/share.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/gov/step/wise.h 至"./config/thermal/gov/step/wise.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/gov/user/space.h 至"./config/thermal/gov/user/space.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/gov/power/allocator.h 至"./config/thermal/gov/power/allocator.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/writable/trips.h 至"./config/thermal/writable/trips.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/emergency/poweroff/delay/ms.h 至"./config/thermal/emergency/poweroff/delay/ms.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thermal/default/gov/step/wise.h 至"./config/thermal/default/gov/step/wise.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/lm95245.h 至"./config/sensors/lm95245.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/isl29028.h 至"./config/sensors/isl29028.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/lm90.h 至"./config/sensors/lm90.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/isl29018.h 至"./config/sensors/isl29018.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/tmp102.h 至"./config/sensors/tmp102.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/ina2xx.h 至"./config/sensors/ina2xx.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/iio/hwmon.h 至"./config/sensors/iio/hwmon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/pwm/fan.h 至"./config/sensors/pwm/fan.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/gpio/fan.h 至"./config/sensors/gpio/fan.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sensors/ntc/thermistor.h 至"./config/sensors/ntc/thermistor.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/device.h 至"./config/cgroup/device.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/writeback.h 至"./config/cgroup/writeback.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/freezer.h 至"./config/cgroup/freezer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/sched.h 至"./config/cgroup/sched.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/cpuacct.h 至"./config/cgroup/cpuacct.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/perf.h 至"./config/cgroup/perf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cgroup/pids.h 至"./config/cgroup/pids.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/tps65090.h 至"./config/mfd/tps65090.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/tps65910.h 至"./config/mfd/tps65910.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/core.h 至"./config/mfd/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/syscon.h 至"./config/mfd/syscon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/palmas.h 至"./config/mfd/palmas.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/tps65218.h 至"./config/mfd/tps65218.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/tps65217.h 至"./config/mfd/tps65217.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/act8945a.h 至"./config/mfd/act8945a.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/tps6586x.h 至"./config/mfd/tps6586x.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/ti/lp873x.h 至"./config/mfd/ti/lp873x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/ti/lp87565.h 至"./config/mfd/ti/lp87565.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/ti/am335x/tscadc.h 至"./config/mfd/ti/am335x/tscadc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mfd/omap/usb/host.h 至"./config/mfd/omap/usb/host.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rc/core.h 至"./config/rc/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rc/decoders.h 至"./config/rc/decoders.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rc/map.h 至"./config/rc/map.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/leds.h 至"./config/mac80211/leds.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/sta/hash/max/size.h 至"./config/mac80211/sta/hash/max/size.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/has/rc.h 至"./config/mac80211/has/rc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/rc/default.h 至"./config/mac80211/rc/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/rc/minstrel.h 至"./config/mac80211/rc/minstrel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/rc/default/minstrel.h 至"./config/mac80211/rc/default/minstrel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mac80211/rc/minstrel/ht.h 至"./config/mac80211/rc/minstrel/ht.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ext4/fs.h 至"./config/ext4/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ext4/fs/security.h 至"./config/ext4/fs/security.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ext4/fs/posix/acl.h 至"./config/ext4/fs/posix/acl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ext4/use/for/ext2.h 至"./config/ext4/use/for/ext2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250.h 至"./config/serial/8250.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/earlycon.h 至"./config/serial/earlycon.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/core.h 至"./config/serial/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/bcm63xx.h 至"./config/serial/bcm63xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/bcm63xx/console.h 至"./config/serial/bcm63xx/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/console.h 至"./config/serial/8250/console.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/omap.h 至"./config/serial/8250/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/fsl.h 至"./config/serial/8250/fsl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/exar.h 至"./config/serial/8250/exar.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/dma.h 至"./config/serial/8250/dma.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/pci.h 至"./config/serial/8250/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/runtime/uarts.h 至"./config/serial/8250/runtime/uarts.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/deprecated/options.h 至"./config/serial/8250/deprecated/options.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/omap/ttyo/fixup.h 至"./config/serial/8250/omap/ttyo/fixup.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/8250/nr/uarts.h 至"./config/serial/8250/nr/uarts.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/of/platform.h 至"./config/serial/of/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serial/core/console.h 至"./config/serial/core/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/switchdev.h 至"./config/net/switchdev.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ingress.h 至"./config/net/ingress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/key.h 至"./config/net/key.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls.h 至"./config/net/cls.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/core.h 至"./config/net/core.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/dsa.h 至"./config/net/dsa.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/egress.h 至"./config/net/egress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ns.h 至"./config/net/ns.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sched.h 至"./config/net/sched.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch.h 至"./config/net/ematch.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/fifo.h 至"./config/net/sch/fifo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/codel.h 至"./config/net/sch/codel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/sfb.h 至"./config/net/sch/sfb.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/cbq.h 至"./config/net/sch/cbq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/ingress.h 至"./config/net/sch/ingress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/netem.h 至"./config/net/sch/netem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/drr.h 至"./config/net/sch/drr.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/prio.h 至"./config/net/sch/prio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/sfq.h 至"./config/net/sch/sfq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/qfq.h 至"./config/net/sch/qfq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/mqprio.h 至"./config/net/sch/mqprio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/red.h 至"./config/net/sch/red.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/dsmark.h 至"./config/net/sch/dsmark.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/htb.h 至"./config/net/sch/htb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/tbf.h 至"./config/net/sch/tbf.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/teql.h 至"./config/net/sch/teql.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/multiq.h 至"./config/net/sch/multiq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/gred.h 至"./config/net/sch/gred.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/hfsc.h 至"./config/net/sch/hfsc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/choke.h 至"./config/net/sch/choke.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/sch/fq/codel.h 至"./config/net/sch/fq/codel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ptp/classify.h 至"./config/net/ptp/classify.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/flow.h 至"./config/net/cls/flow.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/u32.h 至"./config/net/cls/u32.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/route4.h 至"./config/net/cls/route4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/rsvp6.h 至"./config/net/cls/rsvp6.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/tcindex.h 至"./config/net/cls/tcindex.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/ind.h 至"./config/net/cls/ind.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/basic.h 至"./config/net/cls/basic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/act.h 至"./config/net/cls/act.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/fw.h 至"./config/net/cls/fw.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/cls/rsvp.h 至"./config/net/cls/rsvp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/csum.h 至"./config/net/act/csum.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/gact.h 至"./config/net/act/gact.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/skbedit.h 至"./config/net/act/skbedit.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/simp.h 至"./config/net/act/simp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/pedit.h 至"./config/net/act/pedit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/ipt.h 至"./config/net/act/ipt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/nat.h 至"./config/net/act/nat.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/mirred.h 至"./config/net/act/mirred.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/act/police.h 至"./config/net/act/police.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/stack.h 至"./config/net/ematch/stack.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/u32.h 至"./config/net/ematch/u32.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/meta.h 至"./config/net/ematch/meta.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/nbyte.h 至"./config/net/ematch/nbyte.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/cmp.h 至"./config/net/ematch/cmp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ematch/text.h 至"./config/net/ematch/text.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/broadcom.h 至"./config/net/vendor/broadcom.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/ti.h 至"./config/net/vendor/ti.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/alacritech.h 至"./config/net/vendor/alacritech.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/huawei.h 至"./config/net/vendor/huawei.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/aquantia.h 至"./config/net/vendor/aquantia.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/smsc.h 至"./config/net/vendor/smsc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/micrel.h 至"./config/net/vendor/micrel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/marvell.h 至"./config/net/vendor/marvell.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/intel.h 至"./config/net/vendor/intel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/vendor/solarflare.h 至"./config/net/vendor/solarflare.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/ip/tunnel.h 至"./config/net/ip/tunnel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/flow/limit.h 至"./config/net/flow/limit.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/packet/engine.h 至"./config/net/packet/engine.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/net/rx/busy/poll.h 至"./config/net/rx/busy/poll.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ssb/possible.h 至"./config/ssb/possible.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/tests.h 至"./config/mtd/tests.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/ubi.h 至"./config/mtd/ubi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/blkdevs.h 至"./config/mtd/blkdevs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand.h 至"./config/mtd/nand.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/block.h 至"./config/mtd/block.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/m25p80.h 至"./config/mtd/m25p80.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/cmdline/parts.h 至"./config/mtd/cmdline/parts.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/cfi/i2.h 至"./config/mtd/cfi/i2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/cfi/i1.h 至"./config/mtd/cfi/i1.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/ubi/wl/threshold.h 至"./config/mtd/ubi/wl/threshold.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/ubi/beb/limit.h 至"./config/mtd/ubi/beb/limit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/brcmnand.h 至"./config/mtd/nand/brcmnand.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/omap2.h 至"./config/mtd/nand/omap2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/ecc.h 至"./config/mtd/nand/ecc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/denali.h 至"./config/mtd/nand/denali.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/omap/bch.h 至"./config/mtd/nand/omap/bch.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/omap/bch/build.h 至"./config/mtd/nand/omap/bch/build.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/nand/denali/dt.h 至"./config/mtd/nand/denali/dt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/of/parts.h 至"./config/mtd/of/parts.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/spi/nor.h 至"./config/mtd/spi/nor.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/map/bank/width/1.h 至"./config/mtd/map/bank/width/1.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/map/bank/width/2.h 至"./config/mtd/map/bank/width/2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mtd/map/bank/width/4.h 至"./config/mtd/map/bank/width/4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/pnp.h 至"./config/ip/pnp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/multicast.h 至"./config/ip/multicast.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/sctp.h 至"./config/ip/sctp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/nat.h 至"./config/ip/nf/nat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/arptables.h 至"./config/ip/nf/arptables.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/filter.h 至"./config/ip/nf/filter.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/iptables.h 至"./config/ip/nf/iptables.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/arpfilter.h 至"./config/ip/nf/arpfilter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/arp/mangle.h 至"./config/ip/nf/arp/mangle.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/nf/target/masquerade.h 至"./config/ip/nf/target/masquerade.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/pnp/dhcp.h 至"./config/ip/pnp/dhcp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/pnp/bootp.h 至"./config/ip/pnp/bootp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/pnp/rarp.h 至"./config/ip/pnp/rarp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ip/route/classid.h 至"./config/ip/route/classid.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/adv7180.h 至"./config/video/adv7180.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ml86v7667.h 至"./config/video/ml86v7667.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/dev.h 至"./config/video/dev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/vivid.h 至"./config/video/vivid.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ov490.h 至"./config/video/ov490.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ov2659.h 至"./config/video/ov2659.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/mt9t11x.h 至"./config/video/mt9t11x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/v4l2.h 至"./config/video/v4l2.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ov1063x.h 至"./config/video/ov1063x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/vpdma.h 至"./config/video/ti/vpdma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/vpe.h 至"./config/video/ti/vpe.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/csc.h 至"./config/video/ti/csc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/sc.h 至"./config/video/ti/sc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/cal.h 至"./config/video/ti/cal.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ti/vip.h 至"./config/video/ti/vip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/ir/i2c.h 至"./config/video/ir/i2c.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/v4l2/tpg.h 至"./config/video/v4l2/tpg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/v4l2/subdev/api.h 至"./config/video/v4l2/subdev/api.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/video/vivid/max/devs.h 至"./config/video/vivid/max/devs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/cgroup.h 至"./config/blk/cgroup.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev.h 至"./config/blk/dev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/bsg.h 至"./config/blk/dev/bsg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/initrd.h 至"./config/blk/dev/initrd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/sr.h 至"./config/blk/dev/sr.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/loop.h 至"./config/blk/dev/loop.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/ram.h 至"./config/blk/dev/ram.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/sd.h 至"./config/blk/dev/sd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/loop/min/count.h 至"./config/blk/dev/loop/min/count.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/ram/count.h 至"./config/blk/dev/ram/count.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/dev/ram/size.h 至"./config/blk/dev/ram/size.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/mq/pci.h 至"./config/blk/mq/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/mq/virtio.h 至"./config/blk/mq/virtio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/cmdline/parser.h 至"./config/blk/cmdline/parser.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/scsi/request.h 至"./config/blk/scsi/request.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/blk/debug/fs.h 至"./config/blk/debug/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/tunnel.h 至"./config/inet6/tunnel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/ah.h 至"./config/inet6/ah.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/esp.h 至"./config/inet6/esp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/ipcomp.h 至"./config/inet6/ipcomp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/xfrm/tunnel.h 至"./config/inet6/xfrm/tunnel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/xfrm/mode/tunnel.h 至"./config/inet6/xfrm/mode/tunnel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/xfrm/mode/transport.h 至"./config/inet6/xfrm/mode/transport.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet6/xfrm/mode/beet.h 至"./config/inet6/xfrm/mode/beet.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00/lib.h 至"./config/rt2x00/lib.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00/lib/leds.h 至"./config/rt2x00/lib/leds.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00/lib/usb.h 至"./config/rt2x00/lib/usb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00/lib/firmware.h 至"./config/rt2x00/lib/firmware.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2x00/lib/crypto.h 至"./config/rt2x00/lib/crypto.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/pinconf.h 至"./config/generic/pinconf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/clockevents.h 至"./config/generic/clockevents.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/phy.h 至"./config/generic/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/allocator.h 至"./config/generic/allocator.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/io.h 至"./config/generic/io.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/bug.h 至"./config/generic/bug.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/hweight.h 至"./config/generic/hweight.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/smp/idle/thread.h 至"./config/generic/smp/idle/thread.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/pinctrl/groups.h 至"./config/generic/pinctrl/groups.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/net/utils.h 至"./config/generic/net/utils.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/cpu/autoprobe.h 至"./config/generic/cpu/autoprobe.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/early/ioremap.h 至"./config/generic/early/ioremap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/irq/chip.h 至"./config/generic/irq/chip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/irq/probe.h 至"./config/generic/irq/probe.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/irq/show.h 至"./config/generic/irq/show.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/irq/show/level.h 至"./config/generic/irq/show/level.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/irq/effective/aff/mask.h 至"./config/generic/irq/effective/aff/mask.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/strnlen/user.h 至"./config/generic/strnlen/user.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/calibrate/delay.h 至"./config/generic/calibrate/delay.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/sched/clock.h 至"./config/generic/sched/clock.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/pci/iomap.h 至"./config/generic/pci/iomap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/arch/topology.h 至"./config/generic/arch/topology.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/strncpy/from/user.h 至"./config/generic/strncpy/from/user.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/msi/irq.h 至"./config/generic/msi/irq.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/msi/irq/domain.h 至"./config/generic/msi/irq/domain.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/idle/poll/setup.h 至"./config/generic/idle/poll/setup.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/clockevents/broadcast.h 至"./config/generic/clockevents/broadcast.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/pinmux/functions.h 至"./config/generic/pinmux/functions.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/generic/time/vsyscall.h 至"./config/generic/time/vsyscall.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinctrl/single.h 至"./config/pinctrl/single.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinctrl/palmas.h 至"./config/pinctrl/palmas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pinctrl/ti/iodelay.h 至"./config/pinctrl/ti/iodelay.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/lzo.h 至"./config/squashfs/lzo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/zlib.h 至"./config/squashfs/zlib.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/xz.h 至"./config/squashfs/xz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/file/cache.h 至"./config/squashfs/file/cache.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/decomp/single.h 至"./config/squashfs/decomp/single.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/squashfs/fragment/cache/size.h 至"./config/squashfs/fragment/cache/size.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/cfq.h 至"./config/default/cfq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/hostname.h 至"./config/default/hostname.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/iosched.h 至"./config/default/iosched.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/security.h 至"./config/default/security.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/security/dac.h 至"./config/default/security/dac.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/tcp/cong.h 至"./config/default/tcp/cong.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/default/mmap/min/addr.h 至"./config/default/mmap/min/addr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fib/rules.h 至"./config/fib/rules.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sram/exec.h 至"./config/sram/exec.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/hs.h 至"./config/bt/hs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/bredr.h 至"./config/bt/bredr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/debugfs.h 至"./config/bt/debugfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/mrvl.h 至"./config/bt/mrvl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/le.h 至"./config/bt/le.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bt/mrvl/sdio.h 至"./config/bt/mrvl/sdio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps62360.h 至"./config/regulator/tps62360.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/lp873x.h 至"./config/regulator/lp873x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps65218.h 至"./config/regulator/tps65218.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps65090.h 至"./config/regulator/tps65090.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps6586x.h 至"./config/regulator/tps6586x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/act8945a.h 至"./config/regulator/act8945a.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/pbias.h 至"./config/regulator/pbias.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps6507x.h 至"./config/regulator/tps6507x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps65217.h 至"./config/regulator/tps65217.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/palmas.h 至"./config/regulator/palmas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/lp87565.h 至"./config/regulator/lp87565.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps65910.h 至"./config/regulator/tps65910.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/gpio.h 至"./config/regulator/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps65023.h 至"./config/regulator/tps65023.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/tps6524x.h 至"./config/regulator/tps6524x.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/fixed/voltage.h 至"./config/regulator/fixed/voltage.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regulator/ti/abb.h 至"./config/regulator/ti/abb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/magic/sysrq.h 至"./config/magic/sysrq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/magic/sysrq/serial.h 至"./config/magic/sysrq/serial.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/magic/sysrq/default/enable.h 至"./config/magic/sysrq/default/enable.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/reset/controller.h 至"./config/reset/controller.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/reset/ti/syscon.h 至"./config/reset/ti/syscon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/pcf857x.h 至"./config/gpio/pcf857x.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/sysfs.h 至"./config/gpio/sysfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/omap.h 至"./config/gpio/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/pisosr.h 至"./config/gpio/pisosr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/tpic2810.h 至"./config/gpio/tpic2810.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/tps65910.h 至"./config/gpio/tps65910.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/palmas.h 至"./config/gpio/palmas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/pca953x.h 至"./config/gpio/pca953x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/syscon.h 至"./config/gpio/syscon.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpio/pca953x/irq.h 至"./config/gpio/pca953x/irq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/iommu.h 至"./config/of/iommu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/pci.h 至"./config/of/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/irq.h 至"./config/of/irq.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/net.h 至"./config/of/net.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/dynamic.h 至"./config/of/dynamic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/gpio.h 至"./config/of/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/mdio.h 至"./config/of/mdio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/flattree.h 至"./config/of/flattree.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/address.h 至"./config/of/address.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/reserved/mem.h 至"./config/of/reserved/mem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/pci/irq.h 至"./config/of/pci/irq.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/early/flattree.h 至"./config/of/early/flattree.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/of/address/pci.h 至"./config/of/address/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tigon3/hwmon.h 至"./config/tigon3/hwmon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/omap.h 至"./config/dma/omap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/of.h 至"./config/dma/of.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/cma.h 至"./config/dma/cma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/engine.h 至"./config/dma/engine.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/virtual/channels.h 至"./config/dma/virtual/channels.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dma/shared/buffer.h 至"./config/dma/shared/buffer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpufreq/dt.h 至"./config/cpufreq/dt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cpufreq/dt/platdev.h 至"./config/cpufreq/dt/platdev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/v4l/test/drivers.h 至"./config/v4l/test/drivers.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/v4l/mem2mem/drivers.h 至"./config/v4l/mem2mem/drivers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/v4l/platform/drivers.h 至"./config/v4l/platform/drivers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hotplug/cpu.h 至"./config/hotplug/cpu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/clk.h 至"./config/pm/clk.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/debug.h 至"./config/pm/debug.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/opp.h 至"./config/pm/opp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/sleep.h 至"./config/pm/sleep.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/sleep/debug.h 至"./config/pm/sleep/debug.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pm/sleep/smp.h 至"./config/pm/sleep/smp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sys/supports/hugetlbfs.h 至"./config/sys/supports/hugetlbfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sys/supports/apm/emulation.h 至"./config/sys/supports/apm/emulation.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/framebuffer/console.h 至"./config/framebuffer/console.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/framebuffer/console/detect/primary.h 至"./config/framebuffer/console/detect/primary.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/atags/proc.h 至"./config/atags/proc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/media/support.h 至"./config/media/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/media/controller.h 至"./config/media/controller.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/media/usb/support.h 至"./config/media/usb/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/media/camera/support.h 至"./config/media/camera/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mpu3050/i2c.h 至"./config/mpu3050/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/legacy/ptys.h 至"./config/legacy/ptys.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/legacy/pty/count.h 至"./config/legacy/pty/count.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xfrm/ipcomp.h 至"./config/xfrm/ipcomp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xfrm/algo.h 至"./config/xfrm/algo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/xfrm/user.h 至"./config/xfrm/user.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hdq/master/omap.h 至"./config/hdq/master/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/msdos/fs.h 至"./config/msdos/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/msdos/partition.h 至"./config/msdos/partition.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/trigger.h 至"./config/iio/trigger.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/configfs.h 至"./config/iio/configfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/buffer.h 至"./config/iio/buffer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/kfifo/buf.h 至"./config/iio/kfifo/buf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/sw/trigger.h 至"./config/iio/sw/trigger.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/hrtimer/trigger.h 至"./config/iio/hrtimer/trigger.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/consumers/per/trigger.h 至"./config/iio/consumers/per/trigger.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iio/triggered/buffer.h 至"./config/iio/triggered/buffer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/bitbang.h 至"./config/spi/bitbang.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/master.h 至"./config/spi/master.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/gpio.h 至"./config/spi/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/omap24xx.h 至"./config/spi/omap24xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/cadence/quadspi.h 至"./config/spi/cadence/quadspi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/spi/ti/qspi.h 至"./config/spi/ti/qspi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/reed/solomon.h 至"./config/reed/solomon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/reed/solomon/enc8.h 至"./config/reed/solomon/enc8.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/reed/solomon/dec8.h 至"./config/reed/solomon/dec8.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lzo/decompress.h 至"./config/lzo/decompress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lzo/compress.h 至"./config/lzo/compress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iommu/support.h 至"./config/iommu/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iommu/helper.h 至"./config/iommu/helper.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iommu/api.h 至"./config/iommu/api.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/cisco.h 至"./config/wlan/vendor/cisco.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/realtek.h 至"./config/wlan/vendor/realtek.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/ralink.h 至"./config/wlan/vendor/ralink.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/intel.h 至"./config/wlan/vendor/intel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/rsi.h 至"./config/wlan/vendor/rsi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/intersil.h 至"./config/wlan/vendor/intersil.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/ath.h 至"./config/wlan/vendor/ath.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/broadcom.h 至"./config/wlan/vendor/broadcom.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/atmel.h 至"./config/wlan/vendor/atmel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/admtek.h 至"./config/wlan/vendor/admtek.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/zydas.h 至"./config/wlan/vendor/zydas.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/mediatek.h 至"./config/wlan/vendor/mediatek.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/st.h 至"./config/wlan/vendor/st.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/marvell.h 至"./config/wlan/vendor/marvell.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/quantenna.h 至"./config/wlan/vendor/quantenna.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlan/vendor/ti.h 至"./config/wlan/vendor/ti.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/lzma.h 至"./config/rd/lzma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/lzo.h 至"./config/rd/lzo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/gzip.h 至"./config/rd/gzip.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/bzip2.h 至"./config/rd/bzip2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/xz.h 至"./config/rd/xz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rd/lz4.h 至"./config/rd/lz4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crc/ccitt.h 至"./config/crc/ccitt.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crc/itu/t.h 至"./config/crc/itu/t.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/battery/max17040.h 至"./config/battery/max17040.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/battery/act8945a.h 至"./config/battery/act8945a.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/battery/sbs.h 至"./config/battery/sbs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/battery/max17042.h 至"./config/battery/max17042.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs/acl.h 至"./config/cifs/acl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs/xattr.h 至"./config/cifs/xattr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs/debug.h 至"./config/cifs/debug.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs/stats.h 至"./config/cifs/stats.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cifs/posix.h 至"./config/cifs/posix.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/force/max/zoneorder.h 至"./config/force/max/zoneorder.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/modules/use/elf/rel.h 至"./config/modules/use/elf/rel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/modules/tree/lookup.h 至"./config/modules/tree/lookup.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/ssd1307.h 至"./config/fb/ssd1307.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/cmdline.h 至"./config/fb/cmdline.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/backlight.h 至"./config/fb/backlight.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/notify.h 至"./config/fb/notify.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/sys/fillrect.h 至"./config/fb/sys/fillrect.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/sys/imageblit.h 至"./config/fb/sys/imageblit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/sys/copyarea.h 至"./config/fb/sys/copyarea.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/sys/fops.h 至"./config/fb/sys/fops.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/cfb/imageblit.h 至"./config/fb/cfb/imageblit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/cfb/fillrect.h 至"./config/fb/cfb/fillrect.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/cfb/copyarea.h 至"./config/fb/cfb/copyarea.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fb/deferred/io.h 至"./config/fb/deferred/io.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dns/resolver.h 至"./config/dns/resolver.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/at803x/phy.h 至"./config/at803x/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/gic.h 至"./config/arm/gic.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/crypto.h 至"./config/arm/crypto.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/pmu.h 至"./config/arm/pmu.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/lpae.h 至"./config/arm/lpae.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/cpuidle.h 至"./config/arm/cpuidle.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/thumb.h 至"./config/arm/thumb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/ti/cpufreq.h 至"./config/arm/ti/cpufreq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/l1/cache/shift.h 至"./config/arm/l1/cache/shift.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/l1/cache/shift/6.h 至"./config/arm/l1/cache/shift/6.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/patch/idiv.h 至"./config/arm/patch/idiv.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/patch/phys/virt.h 至"./config/arm/patch/phys/virt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/cpu/topology.h 至"./config/arm/cpu/topology.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/cpu/suspend.h 至"./config/arm/cpu/suspend.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/arch/timer.h 至"./config/arm/arch/timer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/arch/timer/evtstream.h 至"./config/arm/arch/timer/evtstream.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/heavy/mb.h 至"./config/arm/heavy/mb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/virt/ext.h 至"./config/arm/virt/ext.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/errata/798181.h 至"./config/arm/errata/798181.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/errata/643719.h 至"./config/arm/errata/643719.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/dma/mem/bufferable.h 至"./config/arm/dma/mem/bufferable.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/has/sg/chain.h 至"./config/arm/has/sg/chain.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/atag/dtb/compat.h 至"./config/arm/atag/dtb/compat.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/atag/dtb/compat/cmdline/from/bootloader.h 至"./config/arm/atag/dtb/compat/cmdline/from/bootloader.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/gic/max/nr.h 至"./config/arm/gic/max/nr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/arm/appended/dtb.h 至"./config/arm/appended/dtb.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/brcmfmac/sdio.h 至"./config/brcmfmac/sdio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/brcmfmac/proto/bcdc.h 至"./config/brcmfmac/proto/bcdc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/omap.h 至"./config/mmc/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/block.h 至"./config/mmc/block.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/sdhci.h 至"./config/mmc/sdhci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/block/minors.h 至"./config/mmc/block/minors.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/sdhci/omap.h 至"./config/mmc/sdhci/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/sdhci/pltfm.h 至"./config/mmc/sdhci/pltfm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/sdhci/of/at91.h 至"./config/mmc/sdhci/of/at91.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/sdhci/of/arasan.h 至"./config/mmc/sdhci/of/arasan.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mmc/omap/hs.h 至"./config/mmc/omap/hs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/lzma.h 至"./config/decompress/lzma.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/xz.h 至"./config/decompress/xz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/lz4.h 至"./config/decompress/lz4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/bzip2.h 至"./config/decompress/bzip2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/gzip.h 至"./config/decompress/gzip.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/decompress/lzo.h 至"./config/decompress/lzo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/devtmpfs/mount.h 至"./config/devtmpfs/mount.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/properties.h 至"./config/touchscreen/properties.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/mms114.h 至"./config/touchscreen/mms114.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/pixcir.h 至"./config/touchscreen/pixcir.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/st1232.h 至"./config/touchscreen/st1232.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/goodix.h 至"./config/touchscreen/goodix.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/ti/am335x/tsc.h 至"./config/touchscreen/ti/am335x/tsc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/atmel/mxt.h 至"./config/touchscreen/atmel/mxt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/touchscreen/edt/ft5x06.h 至"./config/touchscreen/edt/ft5x06.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/hctosys.h 至"./config/rtc/hctosys.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/class.h 至"./config/rtc/class.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/lib.h 至"./config/rtc/lib.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/nvmem.h 至"./config/rtc/nvmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/debug.h 至"./config/rtc/debug.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/systohc.h 至"./config/rtc/systohc.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/palmas.h 至"./config/rtc/drv/palmas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/efi.h 至"./config/rtc/drv/efi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/ds1307.h 至"./config/rtc/drv/ds1307.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/omap.h 至"./config/rtc/drv/omap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/tps6586x.h 至"./config/rtc/drv/tps6586x.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/tps65910.h 至"./config/rtc/drv/tps65910.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/drv/ds1307/hwmon.h 至"./config/rtc/drv/ds1307/hwmon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/intf/sysfs.h 至"./config/rtc/intf/sysfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/intf/proc.h 至"./config/rtc/intf/proc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/intf/dev.h 至"./config/rtc/intf/dev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/systohc/device.h 至"./config/rtc/systohc/device.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/hctosys/device.h 至"./config/rtc/hctosys/device.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtc/i2c/and/spi.h 至"./config/rtc/i2c/and/spi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/enable/must/check.h 至"./config/enable/must/check.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/enable/warn/deprecated.h 至"./config/enable/warn/deprecated.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nls/utf8.h 至"./config/nls/utf8.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nls/default.h 至"./config/nls/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nls/codepage/437.h 至"./config/nls/codepage/437.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nls/iso8859/1.h 至"./config/nls/iso8859/1.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ad525x/dpot.h 至"./config/ad525x/dpot.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ad525x/dpot/i2c.h 至"./config/ad525x/dpot/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/old/sigsuspend3.h 至"./config/old/sigsuspend3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/old/sigaction.h 至"./config/old/sigaction.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sunrpc/gss.h 至"./config/sunrpc/gss.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/core/dump/default/elf/headers.h 至"./config/core/dump/default/elf/headers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss.h 至"./config/omap2/dss.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/init.h 至"./config/omap2/dss/init.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/debugfs.h 至"./config/omap2/dss/debugfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/dpi.h 至"./config/omap2/dss/dpi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/sleep/after/venc/reset.h 至"./config/omap2/dss/sleep/after/venc/reset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/min/fck/per/pck.h 至"./config/omap2/dss/min/fck/per/pck.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2/dss/hdmi/common.h 至"./config/omap2/dss/hdmi/common.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/common/clk.h 至"./config/common/clk.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/common/clk/palmas.h 至"./config/common/clk/palmas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2800/lib.h 至"./config/rt2800/lib.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/zlib/inflate.h 至"./config/zlib/inflate.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/zlib/deflate.h 至"./config/zlib/deflate.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cma/areas.h 至"./config/cma/areas.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cma/alignment.h 至"./config/cma/alignment.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cma/size/mbytes.h 至"./config/cma/size/mbytes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cma/size/sel/mbytes.h 至"./config/cma/size/sel/mbytes.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dp83867/phy.h 至"./config/dp83867/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/stacktrace/support.h 至"./config/stacktrace/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcie/dw.h 至"./config/pcie/dw.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcie/pme.h 至"./config/pcie/pme.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcie/dw/host.h 至"./config/pcie/dw/host.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcie/dw/ep.h 至"./config/pcie/dw/ep.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2800usb/rt35xx.h 至"./config/rt2800usb/rt35xx.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt2800usb/rt33xx.h 至"./config/rt2800usb/rt33xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/no/hz.h 至"./config/no/hz.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/no/bootmem.h 至"./config/no/bootmem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/no/hz/idle.h 至"./config/no/hz/idle.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/no/hz/common.h 至"./config/no/hz/common.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/bsd/process/acct.h 至"./config/bsd/process/acct.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap2plus/mbox.h 至"./config/omap2plus/mbox.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/watchdog/core.h 至"./config/watchdog/core.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/watchdog/handle/boot/enabled.h 至"./config/watchdog/handle/boot/enabled.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm/tiecap.h 至"./config/pwm/tiecap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm/sysfs.h 至"./config/pwm/sysfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm/tiehrpwm.h 至"./config/pwm/tiehrpwm.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm/tipwmss.h 至"./config/pwm/tipwmss.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwm/fsl/ftm.h 至"./config/pwm/fsl/ftm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/init/env/arg/limit.h 至"./config/init/env/arg/limit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/root/nfs.h 至"./config/root/nfs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tmpfs/xattr.h 至"./config/tmpfs/xattr.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tmpfs/posix/acl.h 至"./config/tmpfs/posix/acl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/strict/kernel/rwx.h 至"./config/strict/kernel/rwx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/strict/module/rwx.h 至"./config/strict/module/rwx.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/textsearch/kmp.h 至"./config/textsearch/kmp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/textsearch/bm.h 至"./config/textsearch/bm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/textsearch/fsm.h 至"./config/textsearch/fsm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regmap/spi.h 至"./config/regmap/spi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regmap/i2c.h 至"./config/regmap/i2c.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regmap/irq.h 至"./config/regmap/irq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/regmap/mmio.h 至"./config/regmap/mmio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/split/ptlock/cpus.h 至"./config/split/ptlock/cpus.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/supply.h 至"./config/power/supply.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/avs.h 至"./config/power/avs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/reset.h 至"./config/power/reset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/reset/syscon.h 至"./config/power/reset/syscon.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/reset/gpio.h 至"./config/power/reset/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/power/reset/gpio/restart.h 至"./config/power/reset/gpio/restart.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sctp/cookie/hmac/md5.h 至"./config/sctp/cookie/hmac/md5.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sctp/default/cookie/hmac/md5.h 至"./config/sctp/default/cookie/hmac/md5.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/zone/dma.h 至"./config/zone/dma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irq/work.h 至"./config/irq/work.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irq/crossbar.h 至"./config/irq/crossbar.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irq/domain.h 至"./config/irq/domain.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irq/domain/hierarchy.h 至"./config/irq/domain/hierarchy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/irq/forced/threading.h 至"./config/irq/forced/threading.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fixed/phy.h 至"./config/fixed/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/log/cpu/max/buf/shift.h 至"./config/log/cpu/max/buf/shift.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/log/buf/shift.h 至"./config/log/buf/shift.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/ipcomp.h 至"./config/inet/ipcomp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/tunnel.h 至"./config/inet/tunnel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/esp.h 至"./config/inet/esp.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/ah.h 至"./config/inet/ah.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/diag.h 至"./config/inet/diag.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/xfrm/tunnel.h 至"./config/inet/xfrm/tunnel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/xfrm/mode/beet.h 至"./config/inet/xfrm/mode/beet.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/xfrm/mode/transport.h 至"./config/inet/xfrm/mode/transport.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/xfrm/mode/tunnel.h 至"./config/inet/xfrm/mode/tunnel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/tcp/diag.h 至"./config/inet/tcp/diag.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/inet/sctp/diag.h 至"./config/inet/sctp/diag.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kernel/lzma.h 至"./config/kernel/lzma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kernel/gzip.h 至"./config/kernel/gzip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kernel/mode/neon.h 至"./config/kernel/mode/neon.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tasks/rcu.h 至"./config/tasks/rcu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mach/omap/generic.h 至"./config/mach/omap/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/dra7xx.h 至"./config/soc/dra7xx.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/ti.h 至"./config/soc/ti.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/camera.h 至"./config/soc/camera.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/bus.h 至"./config/soc/bus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/has/realtime/counter.h 至"./config/soc/has/realtime/counter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/soc/camera/platform.h 至"./config/soc/camera/platform.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sg/pool.h 至"./config/sg/pool.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sg/split.h 至"./config/sg/split.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/generic.h 至"./config/backlight/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/gpio.h 至"./config/backlight/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/led.h 至"./config/backlight/led.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/pwm.h 至"./config/backlight/pwm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/class/device.h 至"./config/backlight/class/device.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/backlight/lcd/support.h 至"./config/backlight/lcd/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/mcp251x.h 至"./config/can/mcp251x.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/rcar.h 至"./config/can/rcar.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/raw.h 至"./config/can/raw.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/bcm.h 至"./config/can/bcm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/gw.h 至"./config/can/gw.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/dev.h 至"./config/can/dev.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/calc/bittiming.h 至"./config/can/calc/bittiming.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/c/can.h 至"./config/can/c/can.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/c/can/platform.h 至"./config/can/c/can/platform.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/can/m/can.h 至"./config/can/m/can.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rpmsg/rpc.h 至"./config/rpmsg/rpc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rpmsg/pru.h 至"./config/rpmsg/pru.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rpmsg/virtio.h 至"./config/rpmsg/virtio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rpmsg/proto.h 至"./config/rpmsg/proto.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iosched/deadline.h 至"./config/iosched/deadline.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iosched/cfq.h 至"./config/iosched/cfq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iosched/noop.h 至"./config/iosched/noop.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fs/mbcache.h 至"./config/fs/mbcache.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fs/posix/acl.h 至"./config/fs/posix/acl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/sit.h 至"./config/ipv6/sit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/tunnel.h 至"./config/ipv6/tunnel.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/mip6.h 至"./config/ipv6/mip6.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/multiple/tables.h 至"./config/ipv6/multiple/tables.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/router/pref.h 至"./config/ipv6/router/pref.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/ndisc/nodetype.h 至"./config/ipv6/ndisc/nodetype.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipv6/optimistic/dad.h 至"./config/ipv6/optimistic/dad.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/defconfig/list.h 至"./config/defconfig/list.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/jump/label.h 至"./config/jump/label.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keyboard/qt1070.h 至"./config/keyboard/qt1070.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keyboard/gpio.h 至"./config/keyboard/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keyboard/atkbd.h 至"./config/keyboard/atkbd.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keyboard/matrix.h 至"./config/keyboard/matrix.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/keyboard/samsung.h 至"./config/keyboard/samsung.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hz/100.h 至"./config/hz/100.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hz/fixed.h 至"./config/hz/fixed.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/proc/children.h 至"./config/proc/children.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/proc/fs.h 至"./config/proc/fs.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/proc/sysctl.h 至"./config/proc/sysctl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/proc/page/monitor.h 至"./config/proc/page/monitor.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/proc/pid/cpuset.h 至"./config/proc/pid/cpuset.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/debug/gpio.h 至"./config/debug/gpio.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/debug/fs.h 至"./config/debug/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/debug/kernel.h 至"./config/debug/kernel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/debug/ll/include.h 至"./config/debug/ll/include.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/debug/align/rodata.h 至"./config/debug/align/rodata.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/might/have/pci.h 至"./config/might/have/pci.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/might/have/cache/l2x0.h 至"./config/might/have/cache/l2x0.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/console.h 至"./config/virtio/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/pci.h 至"./config/virtio/pci.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/net.h 至"./config/virtio/net.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/mmio.h 至"./config/virtio/mmio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/blk.h 至"./config/virtio/blk.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/virtio/pci/legacy.h 至"./config/virtio/pci/legacy.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pgtable/levels.h 至"./config/pgtable/levels.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sparse/irq.h 至"./config/sparse/irq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dt/idle/states.h 至"./config/dt/idle/states.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rcu/stall/common.h 至"./config/rcu/stall/common.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rcu/need/segcblist.h 至"./config/rcu/need/segcblist.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rcu/cpu/stall/timeout.h 至"./config/rcu/cpu/stall/timeout.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fat/fs.h 至"./config/fat/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fat/default/iocharset.h 至"./config/fat/default/iocharset.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fat/default/codepage.h 至"./config/fat/default/codepage.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/may/use/devlink.h 至"./config/may/use/devlink.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/thin/archives.h 至"./config/thin/archives.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/eeprom/93cx6.h 至"./config/eeprom/93cx6.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/eeprom/at24.h 至"./config/eeprom/at24.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/oid/registry.h 至"./config/oid/registry.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rwsem/xchgadd/algorithm.h 至"./config/rwsem/xchgadd/algorithm.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rwsem/spin/on/owner.h 至"./config/rwsem/spin/on/owner.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rfkill/leds.h 至"./config/rfkill/leds.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rfkill/gpio.h 至"./config/rfkill/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rfkill/input.h 至"./config/rfkill/input.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/console/translations.h 至"./config/console/translations.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/console/loglevel/default.h 至"./config/console/loglevel/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cls/u32/mark.h 至"./config/cls/u32/mark.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/edac/ti.h 至"./config/edac/ti.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/edac/support.h 至"./config/edac/support.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/edac/legacy/sysfs.h 至"./config/edac/legacy/sysfs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/edac/atomic/scrub.h 至"./config/edac/atomic/scrub.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dummy/console.h 至"./config/dummy/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/trace/irqflags/support.h 至"./config/trace/irqflags/support.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/fs.h 至"./config/nfs/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/common.h 至"./config/nfs/common.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/v3.h 至"./config/nfs/v3.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/v4.h 至"./config/nfs/v4.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/v2.h 至"./config/nfs/v2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/v3/acl.h 至"./config/nfs/v3/acl.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/use/kernel/dns.h 至"./config/nfs/use/kernel/dns.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nfs/acl/support.h 至"./config/nfs/acl/support.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap4/dss/hdmi.h 至"./config/omap4/dss/hdmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap4/dss/hdmi/cec.h 至"./config/omap4/dss/hdmi/cec.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/am335x/control/usb.h 至"./config/am335x/control/usb.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/am335x/phy/usb.h 至"./config/am335x/phy/usb.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/memcg/swap.h 至"./config/memcg/swap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/memcg/swap/enabled.h 至"./config/memcg/swap/enabled.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/videobuf2/memops.h 至"./config/videobuf2/memops.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/videobuf2/core.h 至"./config/videobuf2/core.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/videobuf2/vmalloc.h 至"./config/videobuf2/vmalloc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/videobuf2/dma/contig.h 至"./config/videobuf2/dma/contig.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mdio/bus.h 至"./config/mdio/bus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mdio/device.h 至"./config/mdio/device.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/allow/dev/coredump.h 至"./config/allow/dev/coredump.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gro/cells.h 至"./config/gro/cells.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/binfmt/elf.h 至"./config/binfmt/elf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/binfmt/script.h 至"./config/binfmt/script.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cc/stackprotector/none.h 至"./config/cc/stackprotector/none.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cc/optimize/for/performance.h 至"./config/cc/optimize/for/performance.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/use/of.h 至"./config/use/of.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hardirqs/sw/resend.h 至"./config/hardirqs/sw/resend.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vt/console.h 至"./config/vt/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vt/hw/console/binding.h 至"./config/vt/hw/console/binding.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vt/console/sleep.h 至"./config/vt/console/sleep.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/anon/inodes.h 至"./config/anon/inodes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vmsplit/3g.h 至"./config/vmsplit/3g.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ubifs/fs.h 至"./config/ubifs/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ubifs/fs/zlib.h 至"./config/ubifs/fs/zlib.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ubifs/fs/security.h 至"./config/ubifs/fs/security.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ubifs/fs/lzo.h 至"./config/ubifs/fs/lzo.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ucs2/string.h 至"./config/ucs2/string.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/printk/nmi.h 至"./config/printk/nmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/printk/time.h 至"./config/printk/time.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/printk/safe/log/buf/shift.h 至"./config/printk/safe/log/buf/shift.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mq/iosched/deadline.h 至"./config/mq/iosched/deadline.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mq/iosched/kyber.h 至"./config/mq/iosched/kyber.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cec/core.h 至"./config/cec/core.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lz4/decompress.h 至"./config/lz4/decompress.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dp83848/phy.h 至"./config/dp83848/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/font/support.h 至"./config/font/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/font/8x8.h 至"./config/font/8x8.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/font/8x16.h 至"./config/font/8x16.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/advise/syscalls.h 至"./config/advise/syscalls.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/want/dev/coredump.h 至"./config/want/dev/coredump.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/charger/tps65090.h 至"./config/charger/tps65090.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fair/group/sched.h 至"./config/fair/group/sched.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/partition.h 至"./config/efi/partition.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/stub.h 至"./config/efi/stub.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/vars.h 至"./config/efi/vars.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/esrt.h 至"./config/efi/esrt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/armstub.h 至"./config/efi/armstub.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/params/from/fdt.h 至"./config/efi/params/from/fdt.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/capsule/loader.h 至"./config/efi/capsule/loader.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/vars/pstore.h 至"./config/efi/vars/pstore.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efi/runtime/wrappers.h 至"./config/efi/runtime/wrappers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/extra/firmware.h 至"./config/extra/firmware.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cache/l2x0.h 至"./config/cache/l2x0.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vfat/fs.h 至"./config/vfat/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pid/ns.h 至"./config/pid/ns.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crc32/sliceby8.h 至"./config/crc32/sliceby8.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/auto/zreladdr.h 至"./config/auto/zreladdr.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cross/compile.h 至"./config/cross/compile.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cross/memory/attach.h 至"./config/cross/memory/attach.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/v4l2/fwnode.h 至"./config/v4l2/fwnode.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/v4l2/mem2mem/dev.h 至"./config/v4l2/mem2mem/dev.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/timer/of.h 至"./config/timer/of.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/timer/probe.h 至"./config/timer/probe.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/outer/cache.h 至"./config/outer/cache.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/outer/cache/sync.h 至"./config/outer/cache/sync.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/configfs/fs.h 至"./config/configfs/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/frame/pointer.h 至"./config/frame/pointer.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/frame/vector.h 至"./config/frame/vector.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/frame/warn.h 至"./config/frame/warn.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tick/oneshot.h 至"./config/tick/oneshot.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tick/cpu/accounting.h 至"./config/tick/cpu/accounting.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vm/event/counters.h 至"./config/vm/event/counters.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/base/full.h 至"./config/base/full.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/base/small.h 至"./config/base/small.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fw/loader.h 至"./config/fw/loader.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kexec/core.h 至"./config/kexec/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uninline/spin/unlock.h 至"./config/uninline/spin/unlock.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lockd/v4.h 至"./config/lockd/v4.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/phy/am654/mmc.h 至"./config/phy/am654/mmc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/has/iomem.h 至"./config/has/iomem.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/has/dma.h 至"./config/has/dma.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/has/ioport/map.h 至"./config/has/ioport/map.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwrseq/emmc.h 至"./config/pwrseq/emmc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pwrseq/simple.h 至"./config/pwrseq/simple.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/videomode/helpers.h 至"./config/videomode/helpers.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sched/hrtick.h 至"./config/sched/hrtick.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sched/debug.h 至"./config/sched/debug.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sched/info.h 至"./config/sched/info.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/partition/advanced.h 至"./config/partition/advanced.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mwifiex/sdio.h 至"./config/mwifiex/sdio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/prevent/firmware/build.h 至"./config/prevent/firmware/build.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/efivar/fs.h 至"./config/efivar/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/futex/pi.h 至"./config/futex/pi.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/swp/emulate.h 至"./config/swp/emulate.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/clksrc/mmio.h 至"./config/clksrc/mmio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/clksrc/ti/32k.h 至"./config/clksrc/ti/32k.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hvc/driver.h 至"./config/hvc/driver.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serio/serport.h 至"./config/serio/serport.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/serio/libps2.h 至"./config/serio/libps2.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/clone/backwards.h 至"./config/clone/backwards.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/preempt/rcu.h 至"./config/preempt/rcu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/preempt/count.h 至"./config/preempt/count.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ata/sff.h 至"./config/ata/sff.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ata/bmdma.h 至"./config/ata/bmdma.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ata/verbose/error.h 至"./config/ata/verbose/error.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lockdep/support.h 至"./config/lockdep/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/posix/mqueue.h 至"./config/posix/mqueue.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/posix/timers.h 至"./config/posix/timers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/posix/mqueue/sysctl.h 至"./config/posix/mqueue/sysctl.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pstore/ram.h 至"./config/pstore/ram.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pstore/console.h 至"./config/pstore/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pstore/pmsg.h 至"./config/pstore/pmsg.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pstore/zlib/compress.h 至"./config/pstore/zlib/compress.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/crash/core.h 至"./config/crash/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/autofs4/fs.h 至"./config/autofs4/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/need/dma/map/state.h 至"./config/need/dma/map/state.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/page/offset.h 至"./config/page/offset.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/page/counter.h 至"./config/page/counter.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/panic/timeout.h 至"./config/panic/timeout.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/panic/on/oops/value.h 至"./config/panic/on/oops/value.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/zboot/rom/bss.h 至"./config/zboot/rom/bss.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/zboot/rom/text.h 至"./config/zboot/rom/text.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cfg80211/default/ps.h 至"./config/cfg80211/default/ps.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cfg80211/crda/support.h 至"./config/cfg80211/crda/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/build/bin2c.h 至"./config/build/bin2c.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dw/dmac.h 至"./config/dw/dmac.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dw/dmac/core.h 至"./config/dw/dmac/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kallsyms/all.h 至"./config/kallsyms/all.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kallsyms/base/relative.h 至"./config/kallsyms/base/relative.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hw/console.h 至"./config/hw/console.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hw/random.h 至"./config/hw/random.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hw/perf/events.h 至"./config/hw/perf/events.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hw/random/omap.h 至"./config/hw/random/omap.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/smsc/phy.h 至"./config/smsc/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/simple/pm/bus.h 至"./config/simple/pm/bus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/compat/brk.h 至"./config/compat/brk.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iwlwifi/leds.h 至"./config/iwlwifi/leds.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/iwlwifi/opmode/modular.h 至"./config/iwlwifi/opmode/modular.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cfs/bandwidth.h 至"./config/cfs/bandwidth.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/alignment/trap.h 至"./config/alignment/trap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/buildtime/extable/sort.h 至"./config/buildtime/extable/sort.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/handle/domain/irq.h 至"./config/handle/domain/irq.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/associative/array.h 至"./config/associative/array.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/micrel/phy.h 至"./config/micrel/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/clkdev/lookup.h 至"./config/clkdev/lookup.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ptp/1588/clock.h 至"./config/ptp/1588/clock.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uncompress/include.h 至"./config/uncompress/include.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/localversion/auto.h 至"./config/localversion/auto.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ipc/ns.h 至"./config/ipc/ns.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/misc/filesystems.h 至"./config/misc/filesystems.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hwspinlock/omap.h 至"./config/hwspinlock/omap.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gact/prob.h 至"./config/gact/prob.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/realtek/phy.h 至"./config/realtek/phy.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pruss/remoteproc.h 至"./config/pruss/remoteproc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dst/cache.h 至"./config/dst/cache.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/checkpoint/restore.h 至"./config/checkpoint/restore.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/section/mismatch/warn/only.h 至"./config/section/mismatch/warn/only.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wlcore/sdio.h 至"./config/wlcore/sdio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/pcieaspm/default.h 至"./config/pcieaspm/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/grace/period.h 至"./config/grace/period.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rt/mutexes.h 至"./config/rt/mutexes.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vectors/base.h 至"./config/vectors/base.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/lock/spin/on/owner.h 至"./config/lock/spin/on/owner.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/slab/merge/default.h 至"./config/slab/merge/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/fsl/edma.h 至"./config/fsl/edma.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/perf/events.h 至"./config/perf/events.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/perf/use/vmalloc.h 至"./config/perf/use/vmalloc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hid/generic.h 至"./config/hid/generic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hid/multitouch.h 至"./config/hid/multitouch.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/initramfs/source.h 至"./config/initramfs/source.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rtl/cards.h 至"./config/rtl/cards.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/vf610/adc.h 至"./config/vf610/adc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/multi/irq/handler.h 至"./config/multi/irq/handler.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/marvell/phy.h 至"./config/marvell/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tcp/cong/cubic.h 至"./config/tcp/cong/cubic.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nr/cpus.h 至"./config/nr/cpus.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/suspend/freezer.h 至"./config/suspend/freezer.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/firmware/in/kernel.h 至"./config/firmware/in/kernel.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/rockchip/phy.h 至"./config/rockchip/phy.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/hsr/prp.h 至"./config/hsr/prp.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sync/file.h 至"./config/sync/file.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/cmdline/partition.h 至"./config/cmdline/partition.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/smp/on/up.h 至"./config/smp/on/up.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mutex/spin/on/owner.h 至"./config/mutex/spin/on/owner.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tree/srcu.h 至"./config/tree/srcu.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ntfs/fs.h 至"./config/ntfs/fs.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/omap5/dss/hdmi.h 至"./config/omap5/dss/hdmi.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/phys/addr/t/64bit.h 至"./config/phys/addr/t/64bit.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/extcon/palmas.h 至"./config/extcon/palmas.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/extcon/usb/gpio.h 至"./config/extcon/usb/gpio.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/tracing/support.h 至"./config/tracing/support.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/unix98/ptys.h 至"./config/unix98/ptys.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/seccomp/filter.h 至"./config/seccomp/filter.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ikconfig/proc.h 至"./config/ikconfig/proc.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/elf/core.h 至"./config/elf/core.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dev/coredump.h 至"./config/dev/coredump.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/flat/node/mem/map.h 至"./config/flat/node/mem/map.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/nop/usb/xceiv.h 至"./config/nop/usb/xceiv.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/mandatory/file/locking.h 至"./config/mandatory/file/locking.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sysfs/syscall.h 至"./config/sysfs/syscall.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/sysvipc/sysctl.h 至"./config/sysvipc/sysctl.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/new/leds.h 至"./config/new/leds.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/gpiolib/irqchip.h 至"./config/gpiolib/irqchip.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/file/locking.h 至"./config/file/locking.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/dcache/word/access.h 至"./config/dcache/word/access.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/wilink/platform/data.h 至"./config/wilink/platform/data.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/message/loglevel/default.h 至"./config/message/loglevel/default.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/uts/ns.h 至"./config/uts/ns.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/ahci/dm816.h 至"./config/ahci/dm816.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/config/kuser/helpers.h 至"./config/kuser/helpers.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/compile.h 至"./generated/compile.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/autoconf.h 至"./generated/autoconf.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/autoksyms.h 至"./generated/autoksyms.h：操作不允许
CP： 无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/utsrelease.h 至"./generated/utsrelease.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/bounds.h 至"./generated/bounds.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/timeconst.h 至"./generated/timeconst.h：操作不允许
CP：无法创建硬链接"/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/asm-offsets.h 至"./generated/asm-offsets.h：操作不允许
CP： 无法创建硬链接'/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/perf-1.0/include/generated/uapi/linux/version.h '至'./generated/uapi/linux/version.h：操作不允许

错误：perf-1.0-R9 do_configure：功能失败：copy_perf_source_fin_kernel
错误：存储在以下位置的失败日志文件
：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/perf/1.0-r9/temp/log.do_configure.7323错误：任务(/home/vl/tisdk/sources/oe-core/meta/recipes-kernel/perf/perf.bb：do_configure)失败、退出代码为'1'
注意：任务摘要：已尝试2833个任务、其中2831不需要重新运行1。

摘要：1个任务失败：
/home/vl/tisdk/sources/oe-core/meta/recipes-kernel/perf/perf.bb：DO 配置
摘要：显示1条警告消息。
摘要：显示了2条错误消息、返回非零退出代码。
VL@vlubuntu18：~/tisdk/build

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

请从头开始。您已使用 sudo 运行 bitbake、或者您已擦除 Ubuntu 安装。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

我已尝试以下命令：
sudo machine=am57xx-EVM /home/vl/tisdk/sources/bitbake/bin/bitbake arago-base-tisdk-image

错误为：
错误：图层浏览器图层与仅支持以下系列的核心图层不兼容：Rocko (图层与勇士兼容)

文件 bitbake-cookerdemon.log 为：

--在2019-08-15 11:03:31.156392启动 bitbake 服务器 pid 2622--
回溯(最近一次调用最后一次)：
parseBaseConfiguration 中的文件“/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py”，第283行
self.data = self.parseConfigurationFiles (self.prefiles、selfpostfiles)
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py、第397行、位于 parseConfigurationFiles 中
%(c、"".join (layerseries)、"".join (compat))"
文件"/home/vl/tisdk/sources/bitbake/lib/bb/__init__.py、第104行、致命
提升 BBHandledException()
bb.BBHandledException

在处理上述异常期间，发生了另一个异常：

回溯(最近一次调用最后一次)：
createDaemon 中的文件“/home/vl/tisdk/sources/bitbake/lib/bb/demonize.py”，第77行
function()
文件"/home/vl/tisdk/sources/bitbake/lib/bb/server/process.py，第433行，在_startserver 中
self.tofer = bb.taker.BBCooker (self.configuration、self.FeatureSet)
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cooker.py、第197行、位于_init__中
self.initConfigurationData ()
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cooker.py，第356行，位于 initConfigurationData 中
self.databuilder.parseBaseConfiguration()
文件“/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py”，第316行，位于 parseBaseConfiguration 中
Raise bb.BBHandledException
bb.BBHandledException
错误：图层浏览器层与仅支持这些系列的核心图层不兼容：Rocko (图层与勇士或重击手兼容)

之后、先前正常执行的命令执行时出现错误(P.S. tisdk 中所有文件的属性对于所有用户都是"读取和写入")：

MACHINE=am57xx-EVM bitbake core-image-base

错误：

错误：图层浏览器图层与仅支持以下系列的核心图层不兼容：Rocko (图层与重击手兼容)

文件 bitbake-cookerdemon.log 为：

--在2019-08-15 10:27:46.184787启动 bitbake server pid 2568 --
回溯(最近一次调用的最后一次)：
parseBaseConfiguration 中的文件“/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py”，第283行
self.data = self.parseConfigurationFiles (self.prefiles、selfpostfiles)
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py、第397行、位于 parseConfigurationFiles 中
%(c、"".join (layerseries)、"".join (compat))"
文件"/home/vl/tisdk/sources/bitbake/lib/bb/__init__.py、第104行、致命
提升 BBHandledException()
bb.BBHandledException

在处理上述异常期间，发生了另一个异常：

回溯(最近一次调用最后一次)：
createDaemon 中的文件“/home/vl/tisdk/sources/bitbake/lib/bb/demonize.py”，第77行
function()
文件"/home/vl/tisdk/sources/bitbake/lib/bb/server/process.py，第433行，在_startserver 中
self.tofer = bb.taker.BBCooker (self.configuration、self.FeatureSet)
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cooker.py、第197行、位于_init__中
self.initConfigurationData ()
文件"/home/vl/tisdk/sources/bitbake/lib/bb/cooker.py，第356行，位于 initConfigurationData 中
self.databuilder.parseBaseConfiguration()
文件“/home/vl/tisdk/sources/bitbake/lib/bb/cookerdata.py”，第316行，位于 parseBaseConfiguration 中
Raise bb.BBHandledException
bb.BBHandledException
错误：图层浏览器层与仅支持这些系列的核心图层不兼容：Rocko (图层与重击手兼容)

是否仅再次安装 tisdk？

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

请使用这些命令。

$ sudo dpkg-reconfigure dash
(提示时选择“否”)

关闭已执行 dpkg-reconfigure dash 命令的当前终端，然后打开一个新的终端。

$ sudo apt-get install git build-essential python diffstat texinfo gchrawk path dos2unix wget unzip SOCAT doxygen libc6：i386 libncurses5：i386 libstdc++6：i386 libz1：i386

$ wget releases.linaro.org/.../gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf.tar.xz
$ wget releases.linaro.org/.../gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz

$ tar -Jxvf gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf.tar.xz -C $home
$ tar -Jxvf gcc-linaro-7.2.1-2017.11-x86_64_Aarch64-linux-gnu.tar.xz -C $home

$ git 克隆 git：//arago-project.org/git/projects/oe-layersetup.git tisdk
$ cd tisdk
$./oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-05.01.00.11-config.txt
$ CD 生成
$。配置/设置
$导出 toolchain_path_armv7=$home/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf
$导出 toolchain_path_armv8=$home/gcc-linaro-7.2.1-2017.11-x86_64 Aarch64-Linux-GNU
$ MACHINE=am57xx-EVM bitbake Arago-base-tisdk-image

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

AT 命令：
oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-05.01.00.11-config.txt

错误：

克隆请访问«/home/vl/tisdk/sources/meta-arago»…
错误：flam: data stream error (incorrect header check)
error: Unable to get pack file arago-project.org/.../pack-41d8721a30e3702624bcec07f9e08f31557977b8.pack
the requested URL returned error: 499 request has been forbed by AntiVirus
error: Unable to find 98b9e21d10dfc64a374be7d5b33cc1511029b26e under arago-project.org/.../meta-arago.git
cannot obtain need object 98b9e21d10d10dfc64d374be7b5b33cc1511029b5b5b5bcc1529b26b6b6bcc26b6b6b7b7bd29b5b6b6bcc26b5b6b6b6b6b6b6

错误：获取失败。
错误：无法克隆 arago-project.org/.../meta-arago.git 上的存储库

我是否需要等待正确的 arago-project.org/git/meta-arago.git
还是脚本错误？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

[报价 USER="VLeshka VVV"] 499请求已被防病毒禁止[/quot]
请设置防病毒程序。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

好的、问题确实是在防病毒中。

然后、错误消息：

克隆请访问«/home/vl/tisdk/sources/meta-linaro»…
致命：无法访问“git.linaro.org/.../': server certificate verification failed (服务器证书验证失败)”。 CAfile：/etc/ssl/certs/ca-certificates.crt CRLfile：none
error：Could not clone repository at git.linaro.org/.../meta-linaro.git

我需要修改脚本，还是需要等待正确的 git.linaro.org/openembedded/meta-linaro.git？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您能否输入这些命令并发布最后一条命令的结果？

$ git config --global user.email "you@example.com
$ git config --global user.name“Your Name”(您的姓名)

$ git 克隆 git：//git.linaro.org/openembedded/meta-linaro.git

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

结果为空：

git config --global user.email vleshka@mail.ru
git config --global user.email "vleshka@mail.ru
git config --global user.name "VLeshka"

今天也是错误消息"server certificate verification failed"(服务器证书验证失败)：

克隆 REPO meta-linaro

Cloning to«/home/vl/tisdk/sources/meta-linaro»…
致命：无法访问“git.linaro.org/.../': server certificate verification failed (服务器证书验证失败)”。 CAfile：/etc/ssl/certs/ca-certificates.crt CRLfile：none
error：could not clone reclone repository at git.linaro.org/.../meta-linaro.git
vl@vlubuntu18：~/tisdk$

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

好的、我将提出另一个问题：
我是否需要修改脚本？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您好、VLeshka、

您是否仍然遇到相同的错误？

此致、
Kemal

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

Kemal R. Shakir、您好！

我将在下周暂时运行该命令。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

好的。下周我将等待您的回复。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

Kemal R. Shakir、您好！

命令：
oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-05.01.00.11-config.txt
现在工作得非常好。

现在、我已经编译了 SDK：
MACHINE=am57xx-EVM bitbake core-image-base

并且存在错误(难怪它是 idk-PRU)：

检查 scripts/mod/devicetable-offsets.h
| make[3]：***没有规则使目标'arch/arm/boot/dts/am574x-idk-pru-ex-uio.dtb'停止。
| arch/arm/Makefile：345：目标'am574x-idk-PRU-Excl-uio.dTB'的配方失败
| make[2]：***[am574x-idk-PRU-Excl-uio.dTB]错误2
| makefile：146：目标 UB-make 的配方失败
| make[1]：***[am574x-idk-ex-uio.dtb]错误2 |
针对目标'_make'的 make'：'sub-make'：

失败|'_make'失败
从 shell 命令中退出代码1。
|错误：函数失败：do_compile (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/am57xx_evm-linux-gnueabi/linux-ti-staging/4.14.67 +gitAUTOINC+d315a9bb00-r7a.arago5.tisdk1.3/temp/log.do_compile.15232)
错误：任务(/home/vl/tisdk/sources/meta-ti/recipes-kernel/linux/linux-ti-staging_4.14.bb：do_compile)失败、退出代码为"1"
注：任务摘要：尝试1201任务、但0未能重新运行。2

摘要：2个任务失败：
虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：DO 安装
/home/vl/tisdk/sources/meta-ti/recipes-kernel/linux/linux-ti-staging_4.14.bb：DO 编译
摘要：显示了16条警告消息。
摘要：显示了3条错误消息、返回非零退出代码。
VL@vlubuntu：~/tisdk/build $

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

请阅读此帖子以解决此问题。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

Kemal R. Shakir、您好。

并且存在错误：

编译配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="标题：7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################### |时间：0：00：04
注意：执行 SetScene 任务
注：执行 RunQueue 任务
警告：libpne-1.6.31-r0 do_fetch：无法获取 URL downloads.sourceforge.net/.../libpng-1.6.31.tar.xz、如果可用、则尝试镜像
警告：TI-CGT-PRU-native-2.2.1-r0 do_unpacked：TI
Ubuntu 需要32位 gc 库才能正确运行"libaroero"2016-export"
或 libgothere-installer 201-linoi386-export"libgore"libgoverview" ia-installer 201-linux-installer 201-installer 7.36-linux-installer -linux-linux-installer 201-linux-install" QA 问题：extern-linaro-toolchain：文件/目录已安装但未以任何软件包形式提供：
/lib/libcilkrts.so.5
/lib/libcilkrts.so
/lib/libcilkrts.spec
/lib/libcilkrts.so.5.0.0
请设置文件，以便打包这些项目。 或者、如果不需要、则避免安装它们或在 DO 安装中删除它们。
extern-linaro-toolchain：4个已安装且未出厂的文件。 [install-vs-shipped]
error：TI-CGT-PRU-native-2.2.1-r0 DO 安装：function failed：do _install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.24462)
error：logfile of failure stored in：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.24462



/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.日志数据如下：| debug：executing shell function do _install | cp：cannot do '/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.：no such file or directory | warning：do 1：r exit /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/run.do_install.24462 /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/image/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/recipe-sysroot-native/usr/share/ti/cgt-pru /'
|错误：功能失败：do_install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.24462)
错误：任务(虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：do_install)失败、退出代码为"1"
警告：coreutils-8.27-r0 do_fetch：无法获取 URL distfiles.gentoo.org/.../coreutils-8.27-man.tar.xz;name=manpages、如果可用、则尝试镜像
注意：任务摘要：已尝试1201任务、其中0不需要重新运行1。1

摘要：1个任务失败：
虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：多安装
摘要：显示了5条警告消息。
摘要：显示1条错误消息、返回非零退出代码。

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

log.do_install.24462文件的内容：

调试：执行 shell 函数 DO 安装
CP：无法 stat '/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.：无此类文件或目录
警告：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/run.do_install.24462：1从'CP -r /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.退出1 /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/image/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/recipe-sysroot-native/usr/share/ti/cgt-pru
错误：功能失败：DO 安装(日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.24462)

关于“Please set FILES such that these items are packaged”：有很多文件libcilkrts。*。

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您好、VLeshka、

请参阅此帖子以解决此问题。

此致、
Kemal

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

对于命令"machine=am57xx-evm bitbake ti-CGT-PRU-native -c cleanall"：

VL@vlubunttu：~/tisdk/build machine=am57xx-evm bitbake ti-cgt-pru- native -c cleanall
加载缓存：100%|#################################################### |时间：0：00：00
从依赖项高速缓存加载了4061个条目。
解析配方：100%|############################ |时间：0:00:07
解析3159 .bb 文件完成(3156缓存，3解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="标题：7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################### |时间：0：00
：00注意：执行运行队列任务
注：任务摘要：尝试了3个任务、其中0不需要重新运行、全部成功。

摘要：显示了1条警告消息。
VL@vlubundtu：~/tisdk/build

然后、命令"MACHINE=am57xx-EVM bitbake ti-cgt-PRU-native"：

VL@vlubundu：~/tisdk/build machine=am57xx-evm bitbake ti-cgt-PRU-Native
Loading cache：100%|############################################################################ |时间：0：00：00
从依赖项高速缓存加载了4061个条目。
解析配方：100%|################################################################################################################ |时间：0:00:07
解析3159 .bb 文件完成(3156缓存，3解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="head:7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################################################################### |时间：0：00
：00注意：执行 SetScene 任务
注：执行 RunQueue 任务
警告：TI-CGT-PRU-native-2.2.1-r0 DO_unpack: TI 安装程序需要32位 glibc 库才能正常运行
在 Fedora 上运行'yum install glibc.i686'或在 Ubuntu 上运行'apt-get install gc6：i386' unpacketic 文件
：TI-probone-proband-proband-proband-proband-proband-probone.prue-guard-proband-uni686:microcontrollers-proband-proband-proband-proband-unias:
TI-CGT-PRU-native-2.2.1-r0 DO 填充许可证：无法将许可证文件/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html
/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html 复制到/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/license-destdir/ti-cgt-pru-native/PRU_Code_Generation_Tools_2.2.x_manifest.html：[errno 2]没有此类文件或目录：'/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html '错误：TI-CGT-PRU-native-2.2.1-r0 DO 填充许可证：[TI-CGT-PRU-NATIVE：
/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.4409文件中
存储的错误： /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.4409
日志数据如下
：|调试：执行 shell 函数 DO 执行_install
| CP：无法 stat '/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.：无此类文件或目录
|警告：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/run.do_install.4409：1从'CP -r /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.退出1 /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/image/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/recipe-sysroot-native/usr/share/ti/cgt-pru /'
|错误：功能失败：do_install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.4409)
错误：任务(虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：do_install)失败、退出代码为"1"
注意：任务摘要：尝试了18个任务、其中9个任务不需要重新运行、1个任务失败。

摘要：1个任务失败：
虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：多安装
摘要：显示了4条警告消息。
摘要：显示了2条错误消息、返回非零退出代码。
VL@vlubundtu：~/tisdk/build

请帮助。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

Kemal R. Shakir、您好！
还有其他我应该做的吗？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

是的。您能否发布此命令的输出？

$ ls -al /bin/sh

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

ls -al /bin/sh 的结果：

VL@vlubunttu：~/tisdk/build ls -al /bin/sh
lrwxrwxrwxrwx 1 root root 4 сен 4 09：15 /bin/sh -> bash
vl@vlubuntu：~/tisdk/build

正如我所理解的，应该有 bash。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

是的。您可以尝试使用这些命令吗？

$ MACHINE=am57xx-evm bitbake ti-cgt-pru-native -c cleanall $ MACHINE=am57xx-evm bitbake ti-cgt-pru-native

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

结果为MACHINE=am57xx-evm bitbake ti-cgt-pru-native -c cleanall：

VL@vlubundu：~/tisdk/build machine=am57xx-evm bitbake ti-cgt-pru-native -c cleanall
加载缓存：100%|######################################################## |时间：0：00：00
从依赖项高速缓存加载了4061个条目。
解析配方：100%|################################################################################################################ |时间：0:00:06
解析3159 .bb 文件完成(3156缓存，3解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="head:7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################################################################### |时间：0：00
：00注意：执行运行队列任务
注：任务摘要：尝试了3个任务、其中0不需要重新运行、全部成功。

摘要：显示了1条警告消息。
VL@vlubundtu：~/tisdk/build

结果为MACHINE=am57xx-evm bitbake ti-cgt-pru-native：

VL@vlubundu：~/tisdk/build machine=am57xx-evm bitbake ti-cgt-PRU-Native
Loading cache：100%|############################################################################ |时间：0：00：00
从依赖项高速缓存加载了4061个条目。
解析配方：100%|################################################################################################################ |时间：0:00:06
解析3159 .bb 文件完成(3156缓存，3解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="head:7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################################################################### |时间：0：00
：00注意：执行 SetScene 任务
注：执行 RunQueue 任务
警告：TI-CGT-PRU-native-2.2.1-r0 DO_unpack: TI 安装程序需要32位 glibc 库才能正常运行
在 Fedora 上运行'yum install glibc.i686'或在 Ubuntu 上运行'apt-get install gc6：i386' unpacketic 文件
：TI-probone-proband-proband-proband-proband-proband-probone.prue-guard-proband-uni686:microcontrollers-proband-proband-proband-proband-unias:
TI-CGT-PRU-native-2.2.1-r0 DO 填充许可证：无法将许可证文件/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html
/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html 复制到/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/license-destdir/ti-cgt-pru-native/PRU_Code_Generation_Tools_2.2.x_manifest.html：[errno 2]没有此类文件或目录：'/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html '错误：TI-CGT-PRU-native-2.2.1-r0 DO 填充许可证：[TI-CGT-PRU-NATIVE：
/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.27090文件中
存储的错误： /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.27090
日志数据如下
：|调试：执行 shell 函数 DO 执行_install
| CP：无法 stat '/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.：无此类文件或目录
|警告：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/run.do_install.27090：1从'CP -r /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.退出1 /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/image/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/recipe-sysroot-native/usr/share/ti/cgt-pru /'
|错误：功能失败：do_install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.27090)
错误：任务(虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：do_install)失败、退出代码为"1"
注意：任务摘要：尝试了18个任务、其中9个任务不需要重新运行、1个任务失败。

摘要：1个任务失败：
虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：多安装
摘要：显示了4条警告消息。
摘要：显示了2条错误消息、返回非零退出代码。
VL@vlubundtu：~/tisdk/build

文件：

~/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/PRU_Code_Generation_Tools_2.2.x_manifest.html

信号丢失。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

是否可以运行此命令并重试？

$ sudo apt-get install git build-essential python diffstat texinfo gchrawk path dos2unix wget unzip SOCAT doxygen libc6：i386 libncurses5：i386 libstdc++6：i386 libz1：i386

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

现在、machine=am57xx-EVM bitbake ti-cgt-PRU-native 的结果 函数失败：

VL@vlubundu：~/tisdk/build machine=am57xx-evm bitbake ti-cgt-PRU-Native
Loading cache：100%|############################################################################ |时间：0：00：00
从依赖项高速缓存加载了4061个条目。
解析配方：100%|################################################################################################################ |时间：0:00:06
解析3159 .bb 文件完成(3156缓存，3解析)。 4064个目标、447个跳过、0个屏蔽、0个错误。
警告：
/home/vl/tisdk/sources/meta-processor-sdk/recipes-bsp/common-csl-ip/common-csp-ip_git.bbappend
/home/vl/tisdk/sources/meta-processor-sdk/recipes-devtools/python/python3-native_3.5.2.bbappend 没有可用的方法
注意：解决任何缺失的任务队列相关性

生成配置：
BB_VERSION ="1.36.0"
BUIL_SYS ="x86_64－Linux"
内设 ="Uubuntu-18.04"
TARGET_SYS ="arm-linux-gnueabi"
机器 ="am57xx-evm"
分发包 ="Arago"
distro_version ="2018.08"
TUNE_features ="arm armv7a vfp thumb neon callconvention-hard"
target_FPU ="硬"
meta-processor-sdk ="标题：012bf1c42b1826380ca7557e5185fe88f939a93c"
meta-ROS ="head:e2566402ab108a19634354a934788109422cf409"
meta-arago-distro
meta-arago-extras ="head:85f191c83f7cd7b3b4fb6df08b22fbe24e25773"
meta-browser ="标题：26d50665e2f7223c5f4ad7481a8d2431e7cb55fb"
meta-qt5 ="标题：682ad61c071a9710e9f9d8a32ab1b5f3c14953d1"
元网络
Meta-python
Meta-OE
元- gnome
元多媒体 ="标题：ea996301d9c097bcb8046f08041dc82bb62f8"
meta-ti ="标题：3f26d1f94fbc87740fdfe33292c904e865257e81"
meta-linaro-toolchain
meta-optee ="标题：75dfb67bbb14a70cd47afda9726e2e1c76731885"
元数据 ="head:7d518d342eb67d25aa071fb08d03f06d6da576c6"

正在初始化任务：100%|###################################################################################### |时间：0：00：00
注意：正在执行 SetScene 任务
注意：正在执行 RunQueue 任务
错误：TI-CGT-PRU-native-2.2.1-r0 DO_install：函数失败：Do_install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.29760)
错误：日志文件存储在中：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.29760
日志数据遵循：
|调试：正在执行 shell 函数 DO_install
| CP：无法'/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.' 无此类文件或目录
|警告：/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/run.do_install.29760：1从'cp -r /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/ti-cgt-pru-2.2.1/ti-cgt-pru_2.2.1/.退出1 /home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/image/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/recipe-sysroot-native/usr/share/ti/cgt-pru /'
|错误：功能失败：do_install (日志文件位于/home/vl/tisdk/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/ti-cgt-pru-native/2.2.1-r0/temp/log.do_install.29760)
错误：任务(虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：do_install)失败、退出代码为"1"
注意：任务摘要：尝试了18个任务、其中17个不需要重新运行、1个任务失败。

摘要：1个任务失败：
虚拟：本机：/home/vl/tisdk/sources/meta-ti/recipes-ti/devtools/ti-cgt-pru_2.2.1.bb：多安装
摘要：显示1条警告消息。
摘要：显示1条错误消息、返回非零退出代码。
VL@vlubundtu：~/tisdk/build

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您的 Ubuntu 安装似乎已擦除。您可以尝试在另一台计算机上构建吗？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

实际上、我现在在新计算机上安装了更新的 Ubuntu 18.04、因此我的 dash/bash 有问题。

我可以重新安装 Ubuntu 版本18.04。还是推荐其他版本？

P.S. 我收集了需要执行的所有命令：

sudo apt-get install chrpath g++ gawk gcc make texinfo python python2.7
sudo dpkg-reconfigure dash //检查否//请勿使用 dash
apt-get install git build-Essential sudo python diffstat texinfo gpython path dos2unix wget unzip SOCAT doxi386-libc6：sibzurni386-get i386-libzue-certificate 5：


releases.linaro.org/.../gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf.tar.xz
无支票证书 releases.linaro.org/.../gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz

tar -Jxvf gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf.tar.xz -C $HOME
tar -Jxvf gcc-linaro-7.2.1-2017.11-x86_64_Aarch64-linux-gnu.tar.xz -c $HOME .tar -jc/tisaro-linux-dk-dk.cd-dk.cd-clone


processor-sdk-05.01.00.11-config.txt /arago-project.org/git/projects/oe-layersetup.git -cd/tisdk.cd/tisdk.cd-clone gdk.cd/tisdk.cd-clone .sdk oe-layertool-setup.sh

CONF/setenv
导出工具链_path_armv7=/home/vl/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf
导出工具链_path_armv8=/home/vl/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu

MACHINE=am57xx-EVM bitbake core-image-base

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

您最好安装 Ubuntu 16.04。

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

我将指定哪些内容对 SDK 编译更可靠：

Ubuntu 16.04 i386或 Ubuntu 16.04 AMD64？

0 admin 5 年多前

TI__Guru**** 1626620 points

请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

安装 Ubuntu 16.04 AMD64。处理器 SDK 在 i386上不起作用。

处理器（参考译文帖）

处理器（参考译文帖）(Read Only)

[参考译文] Linux/TMDSEVM572X：Arago &quot；base-rootfs&quot；仅初始化2个以太网接口