请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1570642/fdc1004-q1-standby-mode
器件型号:FDC1004-Q1工具/软件:
您好、
我无法理解器件的待机模式是什么。
是仅当器件未运行转换还是可通过 I2C 设置的已定义模式时?
Bests,
Oscar
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1570642/fdc1004-q1-standby-mode
器件型号:FDC1004-Q1工具/软件:
您好、
我无法理解器件的待机模式是什么。
是仅当器件未运行转换还是可通过 I2C 设置的已定义模式时?
Bests,
Oscar
您好、Oscar、
请参阅以下主题。 不进行任何测量时、器件进入待机模式。 这不是必须通过 I2C 命令进入的模式。