This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TDC1000-TDC7200EVM:正确使用评估板

Guru**** 2619915 points

Other Parts Discussed in Thread: TDC1000, TDC7200

请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/678371/tdc1000-tdc7200evm-proper-usage-of-evaluation-board

器件型号:TDC1000-TDC7200EVM

大家好、我正在尝试连接2个超声波传感器(一个作为发送器、另一个作为接收器)。 我是该器件的新手、我没有找到任何文档来帮助我正确使用该器件。 我将一个传感器连接到 TX1端口、并且能够获得 ToF。 但这对我来说毫无意义。 不应该仅在我连接到 RX 端口时才获得输出。

请帮助我了解评估板。  

提前感谢您。