This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/986122/tida-00978-i-want-to-confirm-that-if-the-pin_1-and-pin_2-of-d1-has-been-assembly-reversed
您好！
该二极管未安装在电路板上。 有一条迹线将放大器的引脚1连接到引脚15、引脚2连接到香蕉插头连接器、引脚3连接到接地。 但是、在组装过程中没有使用二极管。
谢谢、 Sima
好的、非常感谢！
