请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
主题中讨论的其他器件:OPA452
将 GMIN 设置为1E-10并将限制设置为1E12
仍然显示 忽略此部分的第1节中没有数据值
请帮助
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
尊敬的 Minki:
我通过以下步骤解决了您设计的收敛问题:
1.为您的设计编辑仿真配置文件
2.选择 Options -> Analog Simulation -> Auto Converge
3.选中 AutoConverge 复选框。 它将自动检查所有其他设置以进行自动收敛
4.单击确定并重新运行仿真
请告诉我这是否可行、如果您有任何疑问、请告知我。
谢谢、
Jackie