请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TIDA-00557 您好的团队,
我需要一个有关 TIDA-00557板的支持
应用
将 RS232信号(具有握手功能)连接至 FPGA。
问题-
我需要 RS232所有信号电平0 - 2.5V (因为我的 FPGA 电压组仅支持0 - 2.5V 范围)
此开发是否在连接器侧提供兼容电平?
我是否可以得到 D-Sub (RS232)信号电平的另一面、即 MCU/ MPU UART 或 UART 扩展器连接器侧的接口。