This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1230647/power-stage-designer-load-current-in-push-pull
您好！
我不认为这是由 LM25037控制的推挽式拓扑造成的。 您需要将您的问题发布到 Power Stage Designer。
