Other Parts Discussed in Thread: LAUNCHXL-CC1310
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号: LAUNCHXL-CC1310
为了能够使用 SMA 连接器和外部天线、我是否需要更改板载任何内容?

This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: LAUNCHXL-CC1310
器件型号: LAUNCHXL-CC1310
为了能够使用 SMA 连接器和外部天线、我是否需要更改板载任何内容?

尊敬的 Ravi:
您必须将电容器移动到 SMA 路径、如下所示: LAUNCHXL-CC1352P:使用 SMA 天线而非 PCB 天线 — 低于 1GHz 论坛 — 低于 1GHz - TI E2E 支持论坛
此致、
Arthur