请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC1200 你好。
我将 cc1200dk 和 cc120x_ease_link.eww 与 IAR 和 SmartRF Studio 一起 用于寄存器、但当我将寄存器的值更改为以802进行通信时。 15. 4g。 TX CC1200仅发送2个数据包、然后停止、Rx 1不接收数据包。
您是否有解决方案仍使用此代码、但使用802.15.4g?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.