请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC1311P3 错误"射频设计必须与电路板选择保持一致:LP_CC1311P3"
但我会尝试在 CC1311-R3EM-7XD433中对其进行闪存
那么、我应该如何使其与 CC1311-R3EM-7XD433电路板一致?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好!
由于 CC1311-R3EM-7XD433上没有射频开关、以上主题适用。
此致、
扎克