This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TS12A4514:断电时切换状态

Guru**** 666710 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/switches-multiplexers-group/switches-multiplexers/f/switches-multiplexers-forum/862306/ts12a4514-switch-state-if-power-off

器件型号:TS12A4514

你好

如果电源关闭、开关状态是什么?

(开、关、高阻态)

电源关闭时、器件是否连接到特定端口?

此致

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好、Louis、

     TS12A451x 器件具有连接到 Vcc 的保护二极管、因此在断电时不得对 COM/NO/NC 施加电压。

    数据表中的关断泄漏规格提供了电流信息(Vcc = 0V):

    此致

    Saminah