请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:TS5A3159 主题中讨论的其他器件: TMUX6104
您好!
我对 TS5A3159模拟开关有疑问。 NC 引脚处于关断状态时、NC 引脚和接地之间允许的电压电平是多少? 是否允许24V 电压?
谢谢你。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Oleksandr、
当 NC 引脚为高阻态或导通至 COM 时、建议的工作条件为0至 V+电源电压。 根据数据表、在任何情况下都不得在此器件的 NC 引脚上施加24V 电压。
如果您需要支持24V 的器件、请尝试使用 TI.com 上的 TMUX6104开关搜索工具 、搜索 Vdd > 24V
谢谢、
Adam