请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。
器件型号:CC3235MODASF 我有疑问:
由 我自己制作的 CC3235MODASF 板。 电路板的 SOP 配置为010。 当开始连接和编程时、SOP2没有显示低电平、复位信号是低电平、硬件基本和开发板一样。 为什么是这样?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.