大家好
CC2650的波特率可以设置为高于115200吗? (例如:256000)
我想传输大量数据。
我希望减少时间。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
大家好
CC2650的波特率可以设置为高于115200吗? (例如:256000)
我想传输大量数据。
我希望减少时间。
尊敬的郭先生:
数据表 中列出了 TI 驱动程序同样支持的高达3兆波特的波特率。 因此设备能够正常工作、但要小心物理硬件限制。
此致、
Ryan
我刚才通过 LAUNCHXL-CC2650、 UART Echo 示例和终端仿真器确认波特率为921600。 因此、您遇到的问题取决于您正在使用的硬件和工具资源、而不是 CC2650。 在 E2E 上也存在类似的情况 、即用户难以提高波特率。
此致、
Ryan