想请问一下
我使用了controlsuite得lpm_haltwake内的code
检查消耗电流并不像datasheet写得一样维持在50 μA
而我额外增加
FlashRegs.FPWR.bit.PWR = FLASH_SLEEP
并把code烧入至flash中,发现消耗电流能够降低到5mA
但是唤醒后的工作电流仍然维持在5mA
是否有缺少关掉的地方?导致消耗电流降不下来?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
想请问一下
我使用了controlsuite得lpm_haltwake内的code
检查消耗电流并不像datasheet写得一样维持在50 μA
而我额外增加
FlashRegs.FPWR.bit.PWR = FLASH_SLEEP
并把code烧入至flash中,发现消耗电流能够降低到5mA
但是唤醒后的工作电流仍然维持在5mA
是否有缺少关掉的地方?导致消耗电流降不下来?