If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好，我使用的是CCS10.0，用的硬件是F28388D评估板以及HSEC180 controlCARD 基板集线站，仿真器使用的是研旭公司的XDS100V3 EMULATOR USB2.0，Debug会报如下错误：
One of the FTDI driver functions used during the connect
returned bad status or an error. The cause may be one or
more of: no XDS100 is plugged in, invalid XDS100 serial number,
blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable.
Use the xds100serial command-line utility in the 'common/uscif'
folder to verify the XDS100 can be located.
(Emulation package 9.2.0.00002)
你好，我现在又出现了这样的一个错误：
The built-in scan-path length measurement failed.
The built-in scan-path reliability tests cannot be
performed without knowledge of the scan-path length.
Try specifying the scan-path lengths in the command-line
options or board configuration file of this utility or debugger.
(Emulation package 9.2.0.00002)
