我用的是 研旭的28335一体板，做整流的控制，simulink仿真是没有问题的，但是一到实验，只要用flash装载程序，一加电压，pwm输出波形就发生严重振荡，有大量高次谐波，连输入的交流电压也发生了畸变，产生了很多高次谐波，用仿真器的话，一加电压就会出现出错
”IcePick_C_0: Error: (Error -154 @ 0x0) One of the FTDI driver functions used to write data returned bad status or an error. (Emulation package 8.4.0.00006)
C28xx_CPU1: JTAG Communication Error: (Error -154 @ 0x0) One of the FTDI driver functions used to write data returned bad status or an error. (Emulation package 8.4.0.00006)
C28xx_CPU1: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is recommended that you reset the emulator before you connect and reload your program before you continue debugging“
我初步怀疑是不是功率电路对控制板产生的干扰，但是又无法确定，有没有遇到这类问题的朋友帮助解答一下呢
