This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28034: 配置cmd文件中table(_prginRAM)的含义

Part Number: TMS320F28034

...................................

SECTIONS
{

/* Allocate program areas: */
.cinit : > FLASHA PAGE = 0
.pinit : > FLASHA, PAGE = 0
.text : > FLASHA PAGE = 0
.binit : > FLASHA, PAGE = 0
.ovly : > FLASHA, PAGE = 0
codestart : > BEGIN PAGE = 0


ramfuncs : LOAD = FLASHA,
RUN = RAMPRG,
PAGE = 0,
table(_prginRAM)

otp_prg : > OTP PAGE = 0
csmpasswds : > CSM_PWL PAGE = 0
csm_rsvd : > CSM_RSVD PAGE = 0

............

你好,请问cmd文件table(_prginRAM)的含义及用法,谢谢。

  • 你好,我没见过这个table(_prginRAM)函数啊,你是在那个cmd文件中看到的?

  • 是我司产品上的一个文件,完整的配置文件如下。标红色部分的 table(_prginRAM)不知道是啥意思?大概功能是在InitFlash之前把flash中的部分程序复制到RAM中。

    主程序初始化部分包含下面两个子程序:

    copy_prg (&prginRAM);                      // Move the program from FLASH to RAM
    InitFlash ();                                         // Initializes the Flash Control registers

     

    ****************************************************************/

    MEMORY
    {
    PAGE 0:               /* Program Memory */
                                /* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE1 for data allocation */
    RAMPRG            : origin = 0x008000,   length = 0x000080              /* on-chip RAM block L0, for RamFuncs */
    OTP                    : origin = 0x3D7800,   length = 0x000400                  * on-chip OTP */
    FLASHA              : origin = 0x3E8000, length = 0x00FF80               /* on-chip FLASH */
    CSM_RSVD       : origin = 0x3F7F80, length = 0x000076                /* Part of FLASHA. Program with all 0x0000 when                                                                                                              CSM is in use. */
    BEGIN                : origin = 0x3F7FF6, length = 0x000002                          /* Part of FLASHA. Used for "boot to Flash"                                                                                                                        bootloader mode. */
    CSM_PWL         : origin = 0x3F7FF8, length = 0x000008                /* Part of FLASHA. CSM password locations in                                                                                                                      FLASHA */

    IQTABLES         : origin = 0x3FE000, length = 0x000B50        /* IQ Math Tables in Boot ROM */
    IQTABLES2       : origin = 0x3FEB50, length = 0x00008C       /* IQ Math Tables in Boot ROM */
    IQTABLES3       : origin = 0x3FEBDC, length = 0x0000AA       /* IQ Math Tables in Boot ROM */

    ROM                  : origin = 0x3FF27C, length = 0x000D44        /* Boot ROM */
    RESET              : origin = 0x3FFFC0, length = 0x000002         /* part of boot ROM */
    VECTORS         : origin = 0x3FFFC2, length = 0x00003E        /* part of boot ROM */

    PAGE 1 :            /* Data Memory */
                              /* Memory (RAM/FLASH/OTP) blocks can be moved to PAGE0 for program allocation */
                              /* Registers remain on PAGE1 */

    RAMM0             : origin = 0x000100, length = 0x000300          /* on-chip RAM block M0 */
    RAMM1             : origin = 0x000400, length = 0x000400          /* on-chip RAM block M1 */
    RAML0              : origin = 0x008080, length = 0x001f80           /* on-chip RAM block L0 */
                            /* RAML1 : origin = 0x009000, length = 0x001000*/ /* on-chip RAM block L1 */
                            /* RAMH0 : origin = 0x00A000, length = 0x002000 */ /* on-chip RAM block H0 */
    }

                            /* Allocate sections to memory blocks.
                            Note:
                            codestart user defined section in DSP28_CodeStartBranch.asm used to redirect code 
                            execution when booting to flash
                            ramfuncs user defined section to store functions that will be copied from Flash into RAM
                            */ 

    SECTIONS
    {

    /* Allocate program areas: */
    .cinit             : > FLASHA PAGE = 0
    .pinit             : > FLASHA, PAGE = 0
    .text              : > FLASHA PAGE = 0
    .binit             : > FLASHA, PAGE = 0
    .ovly             : > FLASHA, PAGE = 0
    codestart      : > BEGIN PAGE = 0


    ramfuncs      : LOAD = FLASHA, 
                           RUN = RAMPRG, 
                           PAGE = 0,
                           table(_prginRAM)                     //这个是啥意思?/////////

    otp_prg         : > OTP                  PAGE = 0
    csmpasswds : > CSM_PWL        PAGE = 0
    csm_rsvd      : > CSM_RSVD      PAGE = 0

                     /* Allocate uninitalized data sections: */
    .stack            : > RAMM1             PAGE = 1
    .ebss             : > RAML0              PAGE = 1
    .esysmem      : > RAML0              PAGE = 1
    debug_buffer : > RAML0              PAGE = 1

                   /* Initalized sections go in Flash */
                   /* For SDFlash to program these, they must be allocated to page 0 */
    .econst           : > FLASHA           PAGE = 0
    .switch            : > FLASHA           PAGE = 0

                  /* Allocate IQ math areas: */
    IQmath            : > FLASHA           PAGE = 0                          /* Math Code */
    IQmathTables  : > IQTABLES     , PAGE = 0,      TYPE = NOLOAD

    /* Uncomment the section below if calling the IQNexp() or IQexp()
    functions from the IQMath.lib library in order to utilize the
    relevant IQ Math table in Boot ROM (This saves space and Boot ROM
    is 1 wait-state). If this section is not uncommented, IQmathTables2
    will be loaded into other memory (SARAM, Flash, etc.) and will take
    up space, but 0 wait-state is possible.
    */
    /*
    IQmathTables2       : > IQTABLES2,      PAGE = 0, TYPE = NOLOAD
    {

    IQmath.lib<IQNexpTable.obj> (IQmathTablesRam)

    }
    */
    /* Uncomment the section below if calling the IQNasin() or IQasin()
    functions from the IQMath.lib library in order to utilize the
    relevant IQ Math table in Boot ROM (This saves space and Boot ROM
    is 1 wait-state). If this section is not uncommented, IQmathTables2
    will be loaded into other memory (SARAM, Flash, etc.) and will take
    up space, but 0 wait-state is possible.
    */
    /*
    IQmathTables3 : > IQTABLES3, PAGE = 0, TYPE = NOLOAD
    {

    IQmath.lib<IQNasinTable.obj> (IQmathTablesRam)

    }
    */

    /* .reset is a standard section used by the compiler. It contains the */
    /* the address of the start of _c_int00 for C Code. /*
    /* When using the boot ROM this section and the CPU vector */
    /* table is not needed. Thus the default type is set here to */
    /* DSECT */


    .reset                : > RESET,         PAGE = 0, TYPE = DSECT
    vectors             : > VECTORS     PAGE = 0, TYPE = DSECT
    }


    //===========================================================================

     

  • 是的,ramfuncs这个分区确实是用来将flash部分的程序复制到ram运行的,但是table()确实没有看到过,我搜索到的资料也是显示这个函数是用在数据库中的,没在CCS工程中找到这个函数的定义