This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

C2000 ePWM模块中死区模式问题

Dead-Band Operating Modes中Active High Complementary,Active Low Complementary,Active High (AH),Active Low (AL)是什么意思,不大理解啊。。。
求高手指点!

比如说对于下图AHC模式,上下两个波形分别代表的是谁的波形?

  • Hi Jiao,

    AHC表示高电平有效,上面的波形指上管驱动波形,下面的是下管驱动波形。由于高电平有效,所以死区时间内上、下两管电平均为低(无效)。

    ALC则正好相反。

    Regards,

    Jay

  • 您好,非常感谢,您的关于电平有效的解释非常正确,让我有种豁然开朗的感觉!

    祝好!

  • 你好,AHC是一路信号出两路PWM,其中下管信号是根据上管做互补得到的,假如有两路输入信号outA和outB,那下管的信号还是根据outA做互补吗?还是根据outB信号过来?