把在280049上面运行正常的I2C的数据读写程序烧到280049C里面,测试发现读数据的时候CLK信号没有了,不知道什么原因,详图见下方:
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,
从以上波形可以看出,您已经将 F280049 I2C 配置为target(slave),I2C 主机正在请求 F280049 I2C 发送数据。 是的吧?
以及,I2C target似乎没有应答发送的目标方(slave)地址。请确保主机 I2C 正在发送正确的目标地址。