您好,
我是用CCS V12调试F28M36时,想利用watchpoint设置变量条件断点,我在网上找到的资料如下:
里面包含了compare mode等选项,但是我自己的设置界面如下:
并没有compare mode等选项
请问时什么原因?
谢谢!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,
我是用CCS V12调试F28M36时,想利用watchpoint设置变量条件断点,我在网上找到的资料如下:
里面包含了compare mode等选项,但是我自己的设置界面如下:
并没有compare mode等选项
请问时什么原因?
谢谢!
根据您的截图来看,您选择的是watchpoint,但是显示的却是breakpoint的属性界面。
https://software-dl.ti.com/ccs/esd/documents/users_guide_zh/ccs_debug-main.html#breakpoints
这个链接是TI有关CCS断点的文档,您可以参考一下。
您把watchpoint删除之后重新添加,多试几次,还是一样的现象吗?也可以换一个变量或者工程文件试一下。我觉得有可能是卡了IDE的bug。
--
您调试的是哪个核?用的什么调试器?CCS具体是12.几?是自己的板子还是TI的开发板?如果上述方法不奏效的话,我帮您询问下相关团队。