您好,我在下载的时候遇到这样的问题,仿真器可以连上dsp2809,但是在下载的时候,提示,在擦除flash,但是一直不能擦除,直到出现以下提示:Power Failure on Target CPU: Error 0x00001020/-1145 Error during: Execution, Target, Unrecoverable emulation error。请问该如何解决,还望不吝赐教。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. 请检查电源是否供电能力充足,特别是3.3V.
2. 请检查是否3.3V的所有引脚都已经是3.3V了,有可能有虚焊的情况,某个3.3V没有供电。
3. 换个仿真器试试。
4. 是所有的板子都是这样,还是某个板子的单独情况。
5. 锁住了,一般电源的可能性会比较大