This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
以前用CCS3.3编写的工程，在烧写程序时都要改一些on chip flash的选项，现在移植到了CCS 5.5 编译flash的.out文件之后，直接用load program就烧写进去了，不知道还用不用改on chip flash 选项
是的，5.5不需要进行3.3那样的配置了，debug之前配置好Target configuration files，编译通过就可以烧写了
