This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
请问应用程序怎么跳转到TI自带的BOOTLOADR里面的串口下程序的那个地址，SCI_Boot()在bootroom里的地址是多少
controlsuite下“C:\ti\controlSUITE\libs\utilities\boot_rom”有自带bootloader的源码，在里边的.map文件中可以查看各个程序段的地址
TI的片子里面就有固化一段引导代码 用于上电后的引导
接下来关于BOOT的选择 就与几个BOOT引脚的选择有关系了
看选择为EMIF加载 还是SCI加载等
