This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在用28035调试CLA的时候发现：在线调试时能很好地发现CPU和CLA都在运行，程序下载到板子上FLASH后，把板子掉电重新上电，发现CPU程序在运行，CLA程序没有运行，请问一下这是什么情况
Cla1Prog : LOAD = CLA_FLASH,RUN = CLA_PRAM,LOAD_START(_Cla1funcsLoadStart),LOAD_END(_Cla1funcsLoadEnd),LOAD_SIZE(_Cla1funcsLoadSize),RUN_START(_Cla1funcsRunStart),PAGE = 0
//Copy over the CLA code(if running in standalone mode from FLASH)memcpy(&Cla1funcsRunStart, &Cla1funcsLoadStart, (Uint32)&Cla1funcsLoadSize);
在程序中写入memcpy(&Cla1funcsRunStart, &Cla1funcsLoadStart, (Uint32)&Cla1funcsLoadSize);
CMD中
Cla1Prog : LOAD = FLASHD, RUN = RAML3, LOAD_START(_Cla1funcsLoadStart), LOAD_END(_Cla1funcsLoadEnd), RUN_START(_Cla1funcsRunStart), LOAD_SIZE(_Cla1funcsLoadSize), PAGE = 0
仍然会出现上述描述的问题
计算CLA task的偏移地址MVECTx的时候要用_Cla1funcsRunStart
另外你的CLA task是用什么触发的，有没有可能在RAML3分配给CLA之前，给CLA task发了触发信号。
已解决，非常感谢
