This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在InstaSPIN-FOC里面，我的芯片用28069m，我点击仿真运行，程序没有烧写到DSP里面进去，断掉后重新上电，芯片里面没有程序？？？如何将程序烧写到芯片里面进去
把工程中的ram cmd文件换成flash cmd文件就可以烧写程序到flash中。
首先 RAM.CMD 要换为flash.cmd
重新编译 然后load
还有你用的那个版本CCS？
