Two modules can communicate on the same bus, one address is 1 and the other address is 2, and send packets at the same time, only the data of address 1 is arbitrated, but the data of address 2 is not resent. What is the reason?
Already checked that DAR register is set to 0
已经收到了您的案例，调查需要些时间，感谢您的耐心等待。
软件和硬件可能都存在问题。
软件方面，地址2的节点是否启用自动重传。
硬件方面，如果板子是自己做的，检查总线电平是否存在异常。
