If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
On that device you have a LIN/SCI module. HalCoGen calls this "SCI2" if you use it as a SCI. SCI is probably what you want if you aren't sure about LIN. SCI is the basic 'UART'. LIN is mainly used in automobiles and is a lower class (data rate) than CAN and can use cheaper wiring.
The way it's implemented it's a UART plus some special logic in front - this is why the one module is "SCI/LIN". In SCI mode it's a basic UART. In LIN mode it's a UART + Extra LIN logic to make it talk on a LIN network.
