This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
各位前輩好
我的電路上用了兩顆MCU MSP430G2553 與 MSP430F4152
我利用FET-PRO430燒錄時，不小心將MSP430G2553的程式燒錄到MSP430F4152上
從此4152再也不能燒錄了
換上IAR也不行燒錄
請問該怎麼解決 還是沒救了...
一般可以在下载的瞬间按一下复位应该可以解决
是不是把熔丝烧断了？
再次烧写不成功时，有什么提示吗？
JTAG communication initialization.... failedVerifying Security Fuse .................... failed --------------- FAILED !!! -----------------
↑
感謝你的回答 這是燒錄同一顆MCU的錯誤訊息
---------------------------
Error---------------------------Target Microcontroller is not responding!!! Please check the connection between the adapter and the target microcontroller.---------------------------確定 ---------------------------
↑這是檢測保險絲按鈕產生的訊息
確定燒錄器與線路連接正常
JTAG连接不成功，检查一下接线问题。
