如题,关键是
1.离线编程
2.离线代码量可以50K以上(目前代码已经30多K了。。)
3.能兼容FRAM系列的(下一个项目就是FRAM的。)
4.最好是可同时编程多个片子(5片左右就可以了)
5.支持SBW BSL等 可烧熔丝。
6.当然越便宜越好 呵呵。。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Guo Yan, 推荐MSP-GANG, 链接为:
http://www.ti.com.cn/tool/cn/msp-gang
http://www.ti.com.cn/cn/lit/ug/slau358c/slau358c.pdf
MSP GANG 编程器是 MSP430 器件编程器,可同时针对多达八个 MSP430 闪存或 FRAM 器件编程。MSP 群组编程器可使用标准的 RS-232 或 USB 连接与主机 PC 相连,并提供灵活的编程选项,允许用户完全自定义流程。可扩展接口与 8 个目标器件相连(通过 JTAG 或 Spy-Bi-Wire 连接器)。编程可借助 PC 或作为独立设备实现。还提供基于 DLL 的 PC 端图形用户界面。
另外,MSP-GANG的前身是MSP-GANG430,链接如下,但还是推荐MSP-GANG。
http://www.ti.com.cn/tool/cn/msp-gang430
http://www.ti.com.cn/cn/lit/ug/slau101q/slau101q.pdf