This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
msp430f149如何设置DCO为1Mzh，然后，作为uart串口波特率的时钟源，设置波特率为9600？
如何设置？谢谢！
MSP430一般复位后默认的时钟源就是DCO
完全可以用来做串口的时钟源
看看430-ware里面的例程
谢谢
