If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The following hardware and software is required to use the eZ-FET on-board emulation
Personal computer with Windows O/S or Linux
MSP430 Debug Stack (MSP430.DLL 3.3.0.6 or higher)
Texas Instruments Code Composer Studio 5.4 or higher
IAR Embedded Workbench 5.50 or higher
Please Note
Do not change eZ-FET Lite layout. Changes could cause functional failures. In case of failures Texas Instruments will not give any support.
Make sure that you use the correct firmware and tests images matching you eZ-FET Lite firmware.
Personal computer with Windows O/S or Linux MSP430 Debug Stack (MSP430.DLL 3.3.0.6 or higher) Texas Instruments Code Composer Studio 5.4 or higher IAR Embedded Workbench 5.50 or higher
