• 状态
  • 已锁定 已锁定
  • 回复 5 回复
  • 订户 13 订户
  • 视图 3876 视图
  • 用户 0 会员在此处
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2650 LAUNCHPAD--------I2C 读取加速度传感器数据

WENTING WU
Prodigy 110 points
Other Parts Discussed in Thread: CC2650, TCA9406, CC2650STK

您好，

我尝试改变例程“”i2ctmp007“” 来用CC2650开发板上的I2C 接口读取LIS2DS12 加速度传感器的值，可是尝试很多次总是在Console 上打印出如下语句，都没能成功传输出传感器的数值，我附件了empty.c程序，能否给予帮助，多谢。

[Cortex_M3_0] Starting the I2C example
System provider is set to SysMin. Halt the target to view any SysMin contents in ROV.
I2C Initialized!
I2C Bus fault
I2C closed!