TFP401APZP用在液晶屏的PCB上
批次71A91RTG4,在没有HDMI信号时,CLK引脚会输出方波。
就是CLK引脚输出的方波导致我们液晶显示不正常的。
就是CLK引脚输出的方波导致我们液晶显示不正常的。
而批次6BCCRCTG4,在没有HDMI信号时,CLK引脚为低电平,就不会使液晶显示不正常。
请问这大概是原因引起的,可以怎么调吗?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.