用的是六路EPWM,三个一组,六步换向、三步启动,现在的问题是如果两个电机都设置了转速,那么只连一个电机转不起来,必须两个同时连着,请问一下怎么解决
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
用的是六路EPWM,三个一组,六步换向、三步启动,现在的问题是如果两个电机都设置了转速,那么只连一个电机转不起来,必须两个同时连着,请问一下怎么解决
你好,只连一个电机转几圈就停下重新转,软件怎么才能看到是停在哪里了,加断点看不出来