This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
报错信息如图1，调试环境为CCS5.5，使用PGA900 EVM通过XDS200连接PC。
主函数代码如图2，只对外设进行了配置，debug后点击step over。
外设配置函数中在例程中只添加了92,93两行，对电桥电压和MICRO接口配置，运行完93后会报错。
再次点击debug后报错如上图，必须重新上电才能进入debug。请问这种情况该如何解决？
