Other Parts Discussed in Thread: UNIFLASH,
如何擦除TM4C123BH6PZ内部的EEPROM的内容,UniFlash + XDS110没有对应的按钮。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
如何擦除TM4C123BH6PZ内部的EEPROM的内容,UniFlash + XDS110没有对应的按钮。
你好,你是只需要擦除flash而不用写入工程吗?
如果即要擦除又要写入,那么直接选择基于flash的.out文件烧录就可以了。
如果只是擦除不需要烧写,那么可以选择Uniflash - Setting & Utilities - Erase settings,可以选择3种擦除模式。
读取的话,要看你的原始工程是否加密,如果没有加密的话是可以读取的。加密了没办法读取。
EEPROM 与 DMA 和其他系统外设连接在同一条总线上,因此没有编程工具可以访问 EEPROM。
方法肯定是有的,只是没有做到UniFlash界面里。下面的链接有人实现了的。
e2e.ti.com/.../tm4c1230d5pm-xds110-command-line-erase-eeprom-for-tm4c123
UniFlash和CCS都没法看到芯片内部的EEPROM的内容吗?感觉和第三方提供的工具比如Keil,IAR的IDE差距不是一点点哦。
为啥我无法在English论坛里提问呢?只能在Chinese里提问。
总是提示:
To post on the TI E2E design support forums, you must have a valid company email address in your myTI account.
If you have a valid company email address, please update your account by following the steps in this FAQ. You may experience a delay before TI can update your new email address to all necessary systems. Please wait five minutes before trying to log in to the TI E2E design support forums again.
If you don't have a company email address, we encourage you to search the TI E2E design support forums for existing answers, or contact our customer support center for design support.
难道Forum也有国家限制?
英文论坛发帖是需要用企业邮箱来进行注册才能发帖的,用一般的QQ、163等等邮箱都没办法发帖。
企业邮箱的问题方便单独发给帖子吗,我去找我们这方面的负责人看一下这个问题