This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
电路设计参考EVM评估板。拆掉输入脚的两个电阻后，EN脚拉低时上电正常，EN脚一拉高就立马发烫。升压电阻1.1M也试过改成560K，上电还是立马发烫
您的问题在E2E英文论坛已有工程师跟进，请继续关注。https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1010877/drv2700-drv2700-gets-hot-as-soon-as-power-on?tisearch=e2e-sitesearch&keymatch=DRV2700#
拆掉输入脚的两个电阻后，EN脚拉低时上电正常，EN脚一拉高就立马发烫。升压电阻1.1M也试过改成560K，上电还是立马发烫