This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
想請問各位先進 , 關於bq40z50圖中的3個紅框處參數 , 在初期開發時該如何設置 , 或是一般直接照default即可
Design Resistance用默认，另外2个精确点可以测量一下电池包到电芯的阻抗和到系统的阻抗填写进去，主要在turbo模式下有用，谢谢！
實在感謝 ~
