If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The order of the bytes, when entered in ManufacturerAccess, is the reverse of what is written to or read from the
part. For example, if the 1st and 2nd word of the UnSealKey block read returns 0x1234 and 0x5678, then in ManufacturerAccess, 0x3412 and 0x7856 should be entered to unseal the part.
您所引用的文字中的上一句说到：This read- or write-block command allows the user to change the Unseal key for the Sealed-to-Unsealed security-state transition. This function is only available when the bq33100 is in the Unsealed mode, indicated by a cleared [SS] flag. 也就是说，0x60这条指令只能在ss没有被置位时有效，但是因为我之前的误操作，已经将ss置位了，还能用这条UnSealKey指令吗？如何用？
Sealed to Unsealed ： Instructs the bq33100 to extend access to the SBS and data flash space and clears the [SS] flag. In unsealed mode, all data, SBS, and DF have read and write access. Unsealing is a 2 step command performed by writing the 1st word of the UnSealKey to ManufacturerAccess followed by the second word of the UnSealKey to ManufacturerAccess. The unseal key can be read and changed through the extended SBS block command UnSealKey when in Unsealed Mode. To return to the Sealed mode, either a hardware reset is needed, or the ManufacturerAccess Seal command is needed.这是文中的解锁方法。但是里面又说到：The unseal key can be read and changed through the extended SBS block command UnSealKey when in Unsealed Mode.但是我事先并不知道这个解锁密码。请问芯片的初始密码是多少？用户手册里的default value显示为--。请问，解锁密码是多少？急啊！锁住了都不能开展测评工作了。
