This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
BQ40Z60的电池平衡已经使能，但是在operation status中的CB位未检测到电池平衡的活动？这是什么情况呢？
检查以下配置
Settings:Balancing Configuration [CB] = 1
Balancing Configuration [CBR] = 1.
Min Start Balance Delta, Relax Balance Interval, and Min RSOC for Balancing
如果配置都正确需要让电池进入relax状态或者在静置的时候发送IT enable指令，只有在OCVTAKEN之后才会计算ΔQ和balancing time
最后能够看到cell 1 bal time之类的会有相应的均衡时间计算得出，然后会自动开始均衡。
看你的截图，bal time都是0， cell1 ~4的DOD0 相差也不大。
