This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

76940初次使用的疑问



POR事件是什么意思?上电后跟芯片一直通信不上,以下是我看了参考手册之后的理解,不知道对不对

这个芯片上电后默认先进入ship模式,然后通过拉高TS1引脚电平,进入引导,最后进入NORMAL模式,在NORMAL模式下微控制器才能跟76940进行I2C通信。