If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
VEN: Active High Voltage Translation Enable. This signal is optionally used to switch the input voltage
divider on/off to reduce the power consumption (typ 45 uA) of the divider network.
当您的电池>1串以上就会需要用voltage divider ，这个您从Figure 7. Figure 8.就可以看出来
在bq34z100的手册上有这个典型应用。想问下是否是要按键按下后才能检测到电压，按原理图上来说 只有按下LED display按键 Q4 Q5才导通，BAT管脚上才有电压。那为什么 检测板直接连上bqstudio能检测到电压和电量。这其中也没有按LED display按键，按理BAT上是没有电压，那么芯片应该检测不到电压。有点搞不明白
