If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi
确认一下你设置的终止充电电压，注意先写 REG0x15() 再写g REG0x14() 。注意如下： （可以用示波器看一下这个电压）
The SRN pin is used to sense the battery voltage for voltage regulation and should be connected as close to the
battery as possible, and directly place a decoupling capacitor (0.1 µF recommended) as close to the device as
possible to decouple high frequency noise
