This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
想用LM136-5.0得到5V电压基准，按照手册接法如下：8V电源串2.2k电阻至LM136正端，LM136负端接地，ADJ悬空。为什么正端的输出电压只有4.3V，而不是5V。我这里输出端对地有10k的负载。
估计是电阻大了，电流不足以支持IC工作，建议将2.2K电阻减小到1K左右试试。
8V是稳定的
