This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
我们是使用TUI BQ76930 AFEOCD和SCD的保护threshold分别设为100mV及200mV
我们直接在SRN-SRP上使用power supply去让它产生压差
但发现当SRN-SRP的压差为86mV时, 就发生AFE OCD保护, OCD bit被设为1SRN-SRP的压差为154mV时, 就发生AFE SCD保护, SCD bit被设为1
请问一下AFE为什么会提早发生保护的动作?
Thanks
您不通过外加电压，再测一次看是不是会提前进保护
